1989 Fuel injected toyota pickup. At first I thought my problem was the fuel pump not getting power, and after tearing the bed off and rechecking all of the lines, a fuse was just blown. So after replacing the fuse the pump has power again, and will run, but the truck still wont start. I then checked all of the relays and they all check out. I then suspected the MAF/VAMF for fault and it checks out with continuity. Then I went through and checked the fuel lines to see if there was a clog or a break, but there wasnt as far as the line that runs from the pump to the throttle body directly. I have yet to check the injectors or anything like that because they are underneath the throttle body and the fuel rail on my vehicle. What is the quickest/cheapest solution.
SPONSORED LINKS
Wednesday, February 11th, 2015 AT 2:15 PM