Nissan Hardbody Ignition
Browse Nissan Hardbody Ignition questions and answers. Choose a question that matches your symptoms.
11 discussions
Hi All, I Have A Question Related To The Ignition...
Hi All,
I Have A Question Related To The Ignition Timing On My Nissan 2l 16v. The Thing Is I Do Not Know On What Mark To Adjust The...
Asked by chrisvdmerwe
New Distributor Cap And Rotor, Still Engine Runs Bad?
I Scanned The Truck Before And Never Had This Problem, Reason Being. I Installed New Plugs And Wires; And It Still Ran Like I Was Driving...
Asked by NissanLG86
No Spark No Start
Pickup Truck Will Not Start. I Have Put A Whole New Distributor In It, New Plugs And Wires, New Crankshaft Position Sensor And I Am Still...
Asked by Kevinspos
Distributor To Go Bad?
What Can Cause The Distributor To Go Bad Three Times In One Year Replaced Distributor Last Year What Can Cause Them To Go Bad?
Asked by dripper
Ignition Timing And Firing Order Needed
Need The Ignition Timing And Firing Order And The Position Of The Rotor On The Block.
Asked by pacificislander
Spark Plug Wire Placement On Distributor And Firing...
Need Firing Order/wire Placement For The Truck Listed Above. Running Rough/hard Start.
Asked by Bigbob93nissan
I Have Just Rebuild The Motor An Got It Back In The...
I Have Just Rebuild The Motor An Got It Back In The Truck And Everything Hooked Up And I Have No Fire Ive Replaced The Coil Nd The Ignition...
Asked by Anonymous
1987 Nissan Hardbody Timing Problem
I Just Replaced A Stud For The Timing Tension And Put The New Timing Belt On And Lined Up All The Marks And Had Number 1 At Tdc. And I Was...
Asked by outtolunch3484
No Spark At The New Distributor
Battery Turns The New Starter, New Alternator, New Ignition Starter Switch,new Neutral Safety Switch New Fusible Relays. It Cranks And...
Asked by David Emory
What Should The Ignition Coils Read If Good? What...
What Should The Ignition Coils Read If Good? What Should The Resistance Be?
Asked by Anonymous
Browse other repair topics
Can’t find your issue?
Ask a new Nissan Hardbody question
