MITSUBISHI ENDEAVOR ENGINE

Cust Towed Car In, Died After Start-up. Found Blown Fuse #24 In Interior Fuse Block. Replaced, Blew Again As Soon As Key Was Cycled. #24...

I Cannot Find A Repair Manual For This Car, And Can't Figure Out How To Release The Tension On The Timing Belt To Remove And Replace It

One Day I Went To Start It, It Started Up And Ran For A Few Seconds And Then Shut Off. Ever Since Then It Will Only Crank, But Not Turn...

Hi, A Diagnostic On My Engine Today Indicated That It Has A Third Cylinder Misfire, Which Is Causing The Engine To Shake When Idle. What...

My Car Wont Hold In Any Gear Engine Stays On Sounds Fine But Just Revs. I Was At Red Light And When It Was Time To Go I Just Herd A Loud...

Okay, So I Removed The Bolts That Hold It In Place But It Still Won't Budge And Remove. What Am I Doing Wrong?

Hi We Have In Us Shop Mitsubishi Endevor 2004 With Misfire In Cylinder 3 Please Let Me Know How To Replace Or Fix This Problem We Need...

I Would Like To Know What 2 Wires On The Maf Sensor Are For The Air Temp Sensor

Engine Idles Around 1000 When Cold And When Warmed Up It Idles Real Low And Wants To Die. Any Answers? It Seems To Run Fine When Driving It...

Why Vehicle Want Start After Changing Timing Belt? And #2 Coil. The Tps Is Humming On The Throttle Body.