Mazda Truck Transmission
Browse Mazda Truck Transmission questions and answers. Choose a question that matches your symptoms.
28 discussions
B2600 Manual Trans Linkage
I Have A 92 B2600, 2 Wheel Drive, With About 230,000 Miles, No Transmission Trouble In The Past.
Yesterday While I Was Driving On Back...
Asked by ac7ss
B3000 Clutch
I Am Thinking About Changing The Clutch Myself In My 1994 B3000 Pick-up With About 260,000 Miles. How Difficult Is The Job And If Taken To A...
Asked by greenda51
Hard To Shift, Sometimes It Will Not Go Into Gear
Hi, I Have A 1996 Mazda B2300 With A 2.3 L Motor And A 5 Speed Manual Transmission (closed System) With 195,000 Miles. I Have Had This...
Asked by mdeer
Help Please!!!! Clutch In, Idles To 4000 RPM
I Own A 1994 Mazda B3000 V6. It Has Around 100,000 Miles On It. My Issue Only Happens Ever So Often, But Lately It Has Gotten Worse. When...
Asked by weard
Bleeding Mazda B3000 Clutch Master Cylinder
I Have A 2002 B3000 With 58000 Miles. The Slave Cylinder Started Leaking And I Took It To A Very Well Trusted Transmission Shop Because I...
Asked by nstraws
RAW LOCK NON FUNCTIONAL
Hi, I Own A Mazda Bt 50 Double Cab 4wl Drive Which Is Identical To The Ford Double Cab As Its From The Same Company.the 'raw' Locking System...
Asked by husni
2003 Mazda Truck Bleeding The Hyd Clutch
I Have Traced The Lind And Can Not Find The Bleeder Valve. I Loose My Clutch And I Have To Pump The Clutch To Get It Back...do I Need A New...
Asked by hoaredog
2003 Mazda Truck Rebuild
How Much Should It Cost To Rebuild The Transmission On A 03 Mazda Tribute 4x2 Automatic. The Transmission Wont Pull In Drive But Works Fine...
Asked by bluethunder216
I Cant Find A Manual Transmission Dipstick On My...
Transmission Problem
2003 Mazda Truck V6 Two Wheel Drive Manual 70000 Miles
I Cant Find A Transmission Dipstick On My Truck Is There...
Asked by B_boy13
2003 Mazda B3000 Clutch Slave Cylinder
How Difficult Is It To Remove The Trans Working In My Driveway? I Have Doe This Kind Of Work Before Many Years Ago, And I Am Considering...
Asked by prowindo
Browse other repair topics
Can’t find your issue?
Ask a new Mazda Truck question
