Mazda b3000 Repair Questions and Answers


2001 Mazda B3000 4wd Will Not Shift Out Of Low Range

2001 MAZDA B3000
Moved Switch From 2wd To 4hi To 4lo And Will Not Go Into 4hi Or 2wd. Stays In 4lo. Please Help
1 ANSWER
Asked by WTD truck

Intake Manifold Gasket Leak Mazda B3000

2000 MAZDA B3000
Rough Idle Shaking Engine Cylinder #4 Misfire Have Has New Spark Plugs And Wires New Coil Pack New Egr Valve And Used Sea Foam Fuel Injector...
6 ANSWERS
Asked by EricB3000

Auto Trans Not Working

1999 MAZDA B3000
I Did An Engine Swap 3.0 When I Put It Back Togather Auto Trans Don't Work. Worked Fine Before Trans Is 4r44e/5r44e.talked To Trans Shop I...
3 ANSWERS
Asked by aftermath

How To Replace Clyinder Ignition Actuator Drive Gera...

1999 MAZDA B3000
The Clynder Lock With The Key Does Not Activate The Actuator. I Removed The Cylinder Lock Assembly And Foind The End Broke Off In The...
5 ANSWERS
Asked by rkissel

Rough Idle On Start Up?

2006 MAZDA B3000
My Truck Has A Rough Idle On Start Up What Is Wrong?
1 ANSWER
3 IMAGES
Asked by Tim lene

Stranded In Colville No Parts Believe Its Netraul...

2001 MAZDA B3000
Can I Bypass It Temporally..........
4 ANSWERS
2 IMAGES
Asked by swbrannan

Clutch Fails If Outside Temp Leaas Than 30f

1996 MAZDA B3000
Clutch Replaced 18 Months Ago. Clutch Works Fine When Warm Outside. Thought There May Be Water In The System, Drained, Flushed And Bled...
4 ANSWERS
Asked by arcane

Heater Fan And Ac Unit Will Not Come On

1994 MAZDA B3000
There Is Power To The Control Panel, But Neither The Heater Fan Nor The Ac Unit Are Getting Power. I Have Directly Jumped Them And They Both...
2 ANSWERS
Asked by bretthig

1994 Mazda B3000 Engine Races When Ac Or Heater Fan Or...

1994 MAZDA B3000
When I Turn On The Heater Fan Or Ac Fan To High Or Turn Headlights On The Engine Races. Also When Going Downhill In Neutral The Engine Races
1 ANSWER
Asked by DARRYL LEWIS

What Is The Proper Bleeding Procedure For Clutch...

1994 MAZDA B3000
I Just Replaced The Slave Cylnder In This Truck Installed A New Clutch Kit Also, I Need To Know What Is The Proper Bleeding Procedure For...
3 ANSWERS
Asked by rob.kela
Ask a new Mazda b3000 question