MAZDA B3000 ENGINE

Found 65 results

Select a filter to limit the results

Symptoms Camshaft Computer Cover Crankshaft Cylinder Head Idle Air Control Intake Manifold Mass Air Flow Sensor Oil Oil Filter Oil Pressure Sensor Oil Pump Oxygen Sensor Serpentine Belt Starter Throttle Body Timing Belt Timing Chain Wiring

Will Not Start

The Truck Was Running Fine, Until I Was Driving One Day Made A Turn Gave It Gas And It Just Shut Off. I Replaced The Fuel Pump And That...

Asked by andrew lloyd ·

17 ANSWERS

3 IMAGES

1994

Turn Over an Engine by Hand | Bar Over

VIDEO

Turn Over an Engine by Hand | Bar Over

Instructional repair video

Code Reading

A check engine light, also known as a service engine light, or a MIL (malfunction indicator light) is designed to let you know there is a problem with one of your car's...

Hard To Start

My Truck Is Hard To Start, It Takes Several Attempts To Get It Started. It Will Crank But Not Start, After Several Tries It Does Start...

Asked by Timbucktoo ·

3 ANSWERS

2 IMAGES

2001

What Would Cause A Sudden Loss Of Power AND The AC To...

Driving Home Yesterday, 60mph Or So, I Changed Lanes And As I Gave It Some Gas, I Had An Obvious Loss Of Power. It Was Still Running, A...

Asked by froytveit ·

2 ANSWERS

2004

2002 Mazda B3000 Idles Rough And Stalls When Stopping

2002 Mazda B3000 Mileage: 55,000. Recently, The Truck Has Not Been Running Up To Par. It Started Off With The Idle Speed At Low Rpms, {500...

Asked by 2CP-Archives ·

1 ANSWER

2002

1999 Mazda B3000 Truck Will Not Start After Checking...

Truck Running Good, Checked All Fuses Now It Will Not Start? Can Jumper Silnoide Runs Good But Will Not Start

Asked by paw75 ·

1 ANSWER

1999

Engine Issue, When You Come To A Stop It Idles Down...

Truck Starts And Runs For 3-5 Minutes And When You Come To A Stop It Idles Down Sometimes, Other Times It Stalls Out Like It's Flooded...

Asked by Henry Jennings ·

8 ANSWERS

2 IMAGES

1995

P1000 Trouble

A P1000 code is designed to inform the driver the engine management system is not working to it's full potential. When in open loop, the powertrain management system is...

1998 Mazda B3000 Engine/no Power

My Truck Keeps Skipping And Has Now Power While Driving, I Recently Had The Spark Plugs And Plug Wires Changed Hoping That Would Fix The...

Asked by B3000driver ·

8 ANSWERS

1998

Changing Serpentine Belt

This Truck Has A/c. Does The Fan Need To Be Removed In Order To Complete The Process?

Asked by charlestuck ·

1 ANSWER

2 IMAGES

2004

Intake Manifold Gasket Leak Mazda B3000

Rough Idle Shaking Engine Cylinder #4 Misfire Have Has New Spark Plugs And Wires New Coil Pack New Egr Valve And Used Sea Foam Fuel Injector...

Asked by EricB3000 ·

6 ANSWERS

2000

Rough Idle

2001 Mazda B3000 Rough Idle, Backfires, Had Flashing Check Engine Light. Changed Plugs And Wires, Still Idles Rough, Backfires, Engine...

Asked by davidhunter ·

3 ANSWERS

2001

Ask a new Mazda b3000 question

Ask a Car Question. It's Free!

© 1999 - 2025 2CarPros, Inc.