Mazda b3000 Transmission

Browse Mazda b3000 Transmission questions and answers. Choose a question that matches your symptoms.

40 discussions


Clutch Slipping

1994 MAZDA B3000
When I Push "disengage" Clutch Moves Through Gears Easily, As I Let It Out It Slips And Will Only Accelerate Slowly Or Slip More. Is...
1 ANSWER
1 IMAGE
Asked by D.b.cooper

Transmission Exchange

1994 MAZDA B3000
My 1994 4x4 Standard Cab Has A Bad 5 Spd Transmission . Can I Use A 1994 2wd 5 Spd Transmission? If I Pull The Tail Shaft Off The 2wd...
3 ANSWERS
Asked by Charles Harbin

Transmission Problem

1994 MAZDA B3000
I Was Driving Down The Road And Got To A Stop And My Truck Died I Started The Engine Put In It Back In Drive And It Died Again. Every Time...
1 ANSWER
Asked by papawof08

I Have A 6 Cylinder Maual Transmission. Can I Replace...

1994 MAZDA B3000
I Have A 6 Cylinder Maual Transmission. Can I Replace It With A 4 Cylinder Manual Transmission & Will It Bolt Up The Same??? Gracie
1 ANSWER
Asked by Anonymous

Why Do I Have To Add Automatic Transmission Fluid Like...

1994 MAZDA B3000
There Are No Leaks That I Know Of.
1 ANSWER
Asked by Brain buster 333

What Is The Proper Bleeding Procedure For Clutch...

1994 MAZDA B3000
I Just Replaced The Slave Cylnder In This Truck Installed A New Clutch Kit Also, I Need To Know What Is The Proper Bleeding Procedure For...
3 ANSWERS
Asked by rob.kela

Transmission Leak

1994 MAZDA B3000
I Noticed A Leak From My Manual Transmission. (reddish/ping Oil) Upon Further Investigation I Discovered That It Was Coming From The Top Of...
1 ANSWER
1 IMAGE
Asked by tthomasmoraga

1994 Mazda B3000 New Clutch Master And Slave Cylinder

1994 MAZDA B3000
I Just Replaced My Clutch Master And Slave Cylinders And The Line On My 1994 Mazda B3000 And Now Cant Get It To Billed Any Presser At The...
3 ANSWERS
Asked by JEREMYSHANSEN

1994 Mazda B3000 Clutch/bleeding

1994 MAZDA B3000
1994 Mazda B3000 6 Cyl Two Wheel Drive Manual We Bled The Brakes After Installing A New Cllutch And Had To Do It Again. It Has...
1 ANSWER
Asked by Bonnie Webb

Will Not Go Forward Or Backwards?

1993 MAZDA B3000
So, We Have A Manual 1993 Mazda B3000 With A V6 Engine, 3.0l, 6 Cylinder, And It Cranks Up Just Fine But It Will Not Go Forward Or Backwards...
1 ANSWER
Asked by BGoodin1997

Browse other repair topics

Browse by repair topic
DifferentialTransfer CaseTransmission

    Can’t find your issue?

    Ask a new Mazda b3000 question