Mazda b2600 Transmission

5-speed Manual Transmission. Normally, All The Gears When Its Start Will Not Go Into Gear But When Its Off Then Can Put Into Any Gear But...

I Have Changed The Slave Cylinder On The Clutch And Have Dislodged The Clutch Pivot Fork. Can I Fix This Without Removing The Bell Housing...

I Just Would Like To Know If Anyone Could Help Me On The Things I Need To Convert My Truck Listed Above, Two Wheel Drive From Auto To Manual...

I Have A 5 Speed Trans And When Going Down The Road It Comes Out Of 2 Wheel . I Have To Stop And Put It Back Into Gear It Dosent Seem Like...

Sometimes It Sticks In Gear With The Clutch In/hard To Pull It Out Of Gear /clutch Feels Soft

I Got Stuck So I Was Rocking The Truck Shifting From 1st To Reverse And Back To 1st When I Accidently Shifted In 5th Gear And It Stuck There...

I Have 1989 Mazda B2600i 4 X 4. Where Can I Buy A Remote Free Wheel Switch That Is Mounted In The Dash.

My Truck's Clutch Pedal Has Begun To Stick To The Floor When In Gear And Requires Me To Put My Foot Under It While The Truck's...

I Took Down The Trans And Replace The Clucth And The Pilot Bearing And Pressure Plat And The Pedal Sit Real Low