Mazda Engine

Browse Mazda Engine questions and answers. Choose a question that matches your symptoms.

3,598 discussions


Car Will Not Start

1997 MAZDA PROTEGE
My Car Has A Manual Transmissom And It Also Has Cruise Control, The Battery Is Fully Charged And All Of The Lights Come On Bright. It Just...
1 ANSWER
2 IMAGES
Asked by robert.webster

Mazda Xedos 9 1997 Tcs Light Comes On And Engine...

1997 MAZDA XEDOS
Engine Surges After 250 Rpm, Engine Compactment Becomes Very Hot, Though No Sign Of Over Heating
1 ANSWER
Asked by promiseo

97 Mazda Protege...standard Tranny..car Will Start But...

1997 MAZDA PROTEGE
Gear Shift Is Loose And You Don't Need The Cluth To Move It.
4 ANSWERS
Asked by dspell2004@yahoo.com

Starting Problem

1997 MAZDA PROTEGE
When I 1st Turn The Ignition Key Nothing Happens. Lights Come On, But Is Completely Quiet. I Then Turn The Key Again And The Car Starts...
1 ANSWER
Asked by starterwam

What Is The Problem If Car Doesn't Starts?

1997 MAZDA PROTEGE
I Tried To Start The Car With Jump Cable And It Started But When I Removed Jump Cables Engine Get Stopped. Please Can You Tell What Is The...
1 ANSWER
Asked by chandanreddyc

Crank Pulley Removal

1997 MAZDA B2300
Thanks So Much For The Free Answer! My Pulley/balancer Has No Means At All To Facilitate Removal. The Inside Of The Hub Is Absolutely...
3 ANSWERS
1 IMAGE
Asked by mrj5000

Crankshaft Pulley Removal

1997 MAZDA B2300
Replacing Timing Belt On '97 Mazda B2300 4cyl. How Do I Remove The Crankshaft Pulley? There's Nothing To Hook A Puller To. Help! Thanks
1 ANSWER
Asked by mrj5000

Compression Lost

1997 MAZDA 626
I Had Replace Head Gasket At 1997 Mazda 626 Lx 2.0 L. And Lost Comression For All Four Cylinders. Timing Belt Instaled Correct. Cylinder...
3 ANSWERS
Asked by tiras

Engine Vibrates 4th/5th Gear When Driving Uphill

1997 MAZDA B2300
I Have A 1997 Madza B2300 Truck Shortbed That Runs Very Rough In Forth And Fifth Gear When Going Up Hills. As Long As The Truck Is Driven...
1 ANSWER
Asked by lgsaski

1997 Mazda 626 Is Sputtering And Stalling When...

1997 MAZDA 626
My 1997 Mazda 626 With 2.0 4cyl. Runs Fine Until Engine Is Warm, Then Starts To Sputter When Accelerating And Will Stall When Stopping.
1 ANSWER
Asked by augopher

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBalance ShaftBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickDrain PlugEstimateFlexplateGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new Mazda question