Mazda Computer
Browse Mazda Computer questions and answers. Choose a question that matches your symptoms.
90 discussions
PCM/BCM/TCM Pinout Needed?
Bad Ecm. Misfire On #4 Changed Coil Because It Melted, And It Did It Again. I Tested The Line Going To That Specific Coil And The Pcm...
Asked by Pandamonic
Unable To Complete Inspection Diagnostic?
I Went To Bring My Vehicle Listed Above For Inspection. The Mechanic Said He Was Unable To Connect Successfully To The Car Computer. Said...
Asked by dagust482
First Gear To Third Gear And Limp Mode?
My 2008 Mazda, Six We’ll Go From First Gear To Third Gear And It Goes In Limp Mode The Computer Has No Codes In It. I’ve Already Had It...
Asked by Dancy
Car Keeps Going Into Limp Mode?
My Car Keeps Going Into Limp Mode. It Won’t Come On The Third Gear Do You Think It Needs A Speed Sensor And If It Does Where Is It Located...
Asked by Dancy
Code U0101?
I Got A Problem With My Car Wasn't Illuminating On Dash To Show Which Gear The Transmission Is In. Checked My Transmission Relay, Seems...
Asked by Elvis Nhamo
PCM Replaced And Fuel Injector Not Working After...
Hello,
I Mistakenly Reversed The Battery Connection And The Pcm Got Fried Almost Immediately.
After Replacing Pcm, Some Fuel Injectors...
Asked by Hudumasaud@gmail.com
Does PCM Need Reflashing?
I Recently Bought The Car Listed Above And Just Realized That There's No Tcm. Where It Is Located? My Transmission Works Fine After "...
Asked by kennclarkm
Pcm/ecu/ecm Flash/reprogram?
I Am Doing A Engine Swap In A 2007 Mazda 6i. I Am Almost Finished And Need To Know If With The Stock Pcm/ecu/ecm And Wire Harness If I Have...
Asked by Jeffyp
OBD2 Port Not Communicating With The With The...
Obd2 Port Has Power, But Won't Communicate With The Inspection Machine To Dmv.
Asked by Alexscruff61
PCM Issue
Hello,
I Recently Had My Engine Replaced In My Car. When I Got It Back The First Time, The Check Engine Light Came On And They Told Me...
Asked by kkrohn
Browse other repair topics
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBalance ShaftBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadDipstickDrain PlugEstimateFlexplateGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnock SensorMAP SensorMass Air Flow SensorMountOilOil ChangeOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring
Can’t find your issue?
Ask a new Mazda question
