Isuzu KB280 Engine
Browse Isuzu KB280 Engine questions and answers. Choose a question that matches your symptoms.
14 discussions
Please I Need The Cylinderhead Bolt Torque And Tappet...
This Van Overheated, I Am Replacing The Head Gasket
Asked by ahomedy
Can I Get An Engine Wiring Diagram For A C24SE, KB240...
Anyone With A Wiring Diagram For Isuzu, Engine C24se, Kb240 2005 Petrol Engine?
Asked by Emmanuelngandu
No Power Supply To Engine And Engine Not Heating Up
The Heat Gauge Of My Isuzu Kb 240le Is Not Going Up And When I'm Driving The Amount Of Power Has Immensely Reduced When The Van Is Moving....
Asked by Kanguaiko
Vehicle Randomly Stalls
Vehicle Had No Power Going Uphill And Slow To Accelerate. We Changed Both Pressure Plates But No Change. We Then Changed Clutch Plate Then...
Asked by njekwa
Engine Torques Specification
I Am Doing An Engine Overhaul On The Vehicle And I Am Replacing With New Pistons, Big End And Main Bearings Replacement. I Need Assistance...
Asked by Lucky Baloyi
Starting Problem
When Testing The Starter Not Fitted It Performs Good, But When Fitted It Gives A Click Sound. Sometimes Very Quiet Or It Cranks But Not...
Asked by mupbenjie
Torque Settings For Cylinder Head
Good Day, Please Help Me Me Torque Settings For Vehicle Listed Above (petrol).
Asked by Blacque Coffee Nkululeko Ndlela
Electrical Power Disappear And Comes Back Later
If Lights Are Lit Or If Electric Power Windows Are Opened Or Closed. Problem Just Developed The Car Starts Well Without Any Complications...
Asked by marimbe1
Hi There, My 280dt Is Still Going Strong. Four...
Hi There, My 280dt Is Still Going Strong. Four Questions:
-do I Need To Replace The Timing Belt And At What Intervals?
-is It Worth...
Asked by Anonymous
Piston And Liner Size
I Am Driving A Isuzu 4jb1 Kb280 1996 Model. During 2017 I Replaced The 2.8 Engine With 4jh1(3.0) Engine. I'm Busy Rebuilding The 4jh1...
Asked by CORNELIUS ROOY
Browse other repair topics
Can’t find your issue?
Ask a new Isuzu KB280 question
