Isuzu Amigo
BrakesClimate ControlDrivetrainElectricalEmissionEngineEngine CoolingExhaustExterior LightFuel SystemGeneralIgnitionInteriorSafetySteeringSuspensionWarning Lights
How Is The Timing Mark Supposed To Be Placed?
Please Can I Get A Clear Image And On How The Timing Belt Is Supposed To Be Placed On An Isuzu Amigo Engine?
Asked by Gladys00001
A/C Fan Motor Intermittently Shuts Off And Turns On?
Then Fan On The Ac Runs A Little While And Shuts Off Then After A Couple Minutes It Comes Back On.
Asked by mark420
Crankshaft Position Sensor Alarm?
Decided To Install A New Distributor. It Is Very Difficult To Remove Or Replace The Distributor Cap. It Has 3 Philips Head Screws That Are A...
Asked by Showtime2
The Engine Fires A Few Times But Will Not Start, Where...
Ran Codes Using A Jumper Wire. Got A Code 41. Crankshaft Position Sensor Error. Can't Locate The Sensor On The Engine.
Asked by Showtime2
Which Automatic Transmissions Will Interchange For...
Replacing The Transmission, Which Automatic Transmissions Will Interchange?
Asked by Ehines
Hard/long Start
The Engine Will Start After Turning Over Three To Four Times. Sometimes When The Engine Is Warmed Up It Takes Longer To Start. I Would Like...
Asked by Wenno
Clutch Pedal Will Not Return From Floor
Just Replaced The Clutch Slave And Master Cylinder,, But Now The Clutch Pedal Will Not Return From The Floor Without Me Pulling It Up...
Asked by Susan Talbott
Lurched Forward Into Garage Door
Parked In First Gear With E-brake Engaged. Keys Not In Ignition.was Away From Car For About An Hour. Went Out To Find It Smashed Into Garage...
Asked by Sugrmommy@gmail.com
Bogging Down
So I Came Home From Work Yesterday And My Truck Started Bogging Down On My Road Luckily. Left This Mourning And Went To Jump On The Freeway...
Asked by Michael Mowbray
Ask a new Isuzu Amigo question
