GMC Jimmy Fuse Panel
Browse GMC Jimmy Fuse Panel questions and answers. Choose a question that matches your symptoms.
12 discussions
Trailer Lights Have No Power?
The Fuse Has A Block Of 6 Fuses All Related To The Trailer Wiring And There Is No Power To Any Of Them. I Was Starting To Install A Trailer...
Asked by James Cunningham
1998 GMC Jimmy Fuse Relay Block Under Hood
If The Fuel Relay Has A Loose Connection, Will It Mess Up The Fuel Pump? If So, Is There A Way To Open Up The Fuse Block And Put New Plugs...
Asked by kimbey
Power Distribution Block Location
I Searched For It Using A Diagram My Mechanic Provided And It Wasn't There (behind/beneath My Dash). There's No Power Getting To The...
Asked by Bob31
Where Is The Fuse For My Head Lights (both High And...
Where Is The Fuse For My Head Lights (both High And Low Beam )... Daytime Lights Are Fine.... It Does Not To Seem To Be In My Drivers Dash...
Asked by Anonymous
1997 GMC Jimmy Circuit Breaker
Electrical Problem
1997 Gmc Jimmy 6 Cyl Four Wheel Drive Automatic
I Have A 1997 Gmc Jimmy. For Some Reason The Circuit Breaker For...
Asked by biesc8801
Where Is The Power Seat Fuse Located?
There Is No Response To Any Of The Power Buttons On The Driver's Seat. All Other Seats Have Been Removed Due To Mouse Infestation. The...
Asked by Richard Meserve
1996 GMC Jimmy No Responce To Ignition
But Starter Has Power And Solenoid Works No Power At Fuse Block Checked All Wires No Breajs Or Shorts In Harness Need To Know Where And What...
Asked by jamisonhowell
1996 Gmc Jimmy Fuse Box
1996 Gmc Jimmy Interior Lights , High Beams, Hazards, And Blinkers, Cigarette Lighter, Hitch Door, Horn Stop Working
Asked by chellie
1995 GMC Jimmy 95 Jimmy No Power At All ?
Electrical Problem
1995 Gmc Jimmy 6 Cyl Four Wheel Drive Automatic 262 Km Miles
Hi There I Am New Here Thanks!!!!!!! My Problem Is I...
Asked by mike95jimmy
1990 GMC Jimmy EMCB Fuse
Electrical Problem
1990 Gmc Jimmy V8 Four Wheel Drive Automatic
My Automobile Blows The Emcb Fuse Everytime I Put It In Reverse And...
Asked by gmccool3
Browse other repair topics
Can’t find your issue?
Ask a new GMC Jimmy question
