GMC Canyon Engine Not Running
Browse GMC Canyon Engine Not Running questions and answers. Choose a question that matches your symptoms.
6 discussions
Code P0300 P16a1, No Start After Injector Replacement?
I Replaced Plugs Coil Packs And Pulled Injectors Replaced Injector On Cylinder 4. Now No Crank No Start Has P0300 P16a1 Scanner Will Not...
Asked by Dirt poor
2010 GMC Canyon Wont Start Sometimes
Sometimes Out Of The Blue My Truck Wont Start. The Battery Is Fully Charged. The Cables Are Clean. No Warning Lights Are On As A Fact...
Asked by dwightworl1
Engine Cranks But Does Not Start?
Timing Chain (tc) Blew Out And Had To Perform A Full Cloyes Kit Replacement.
Timing Chain Issues With Gmc Canyons Are A Well-known...
Asked by NOLA Jax
2006 GMC Canyon Won't Start Sometimes
Just Recently The Truck Has Started To Not Start. I The Engine Engages But It Will Not Fire. Took It To A Shop. The Fuel Pump, Starter...
Asked by sdunn2110
Intermittent Long Cranking And No Start Issue
On Occasion My Vehicle Will Crank Continuously But Fail To Kick Over And Start. Later It Will Start With No Problem. I Had The Fuel Pump...
Asked by imnotte42
My Gmc Canyon Will Turn Over But Wont Start
I Recently Had A Selector Cable Installed Since Then My Battery Went Dead Twice Each Time The Driver Side Window And Power Lock Control...
Asked by toope
Browse other repair topics
Burning OilIdle ErraticIdle LowIdle RoughNot Cranking OverNot RunningOil LeakOverheatRevs UpRuns HotStall While DrivingStall at Idle
Can’t find your issue?
Ask a new GMC Canyon question
