GMC
BodyBrakesClimate ControlDrivetrainElectricalEmissionEngineEngine CoolingExhaustExterior LightFuel SystemGeneralIgnitionInteriorSafetySecuritySteeringSuspensionTiresTrouble CodesWarning Lights
Drivers Side Brake Light Does Not Work?
Drivers Side Brake Light Doesn't Work, Blinker Flashes Fast. All Bulbs And Fuses Are Good No Loose Ground Wires And Flashers Work Normal...
Asked by Jr. Strohm
Shift The Transmission Into Gear The Vehicle Will Move...
Crank Shift Into Gear Vehicle Will Move A Little Then No Gears No Movement But Engine Still Running. After A Little While You Can Restart...
Asked by chevyboy84
Is A Bidirectional Scan Tool Needed For Routine...
For The Following Maintenance Activities, Is A Bidirectional Scan Tool Needed?
A. Brake System Flush, Using A Pressure Bleeder.
B....
Asked by 43zx2
Looking For A Reputable Dyno Shop?
I Have A Gen Lll 6,0 Ls (lq9), That I’m Going To Be Rebuilding And Putting In My 1972 C3500 Gmc. I Live In California Between Bakersfield...
Asked by Bubbasmeat@yahoo.com
Transmission Slipping And Code P0963?
Hello, My Vehicle Is Still Slipping And Giving The Code P0963, I Replaced Solenoids And Flushed And Cleaned Everything. I Have Now Opened...
Asked by Jamiemora
Violent Banging Noise From The Engine?
Getting A Violent Banging Noise From The Engine. Decreases When In Gear And Stopped. Increases When Accelerating.
Asked by David Greenhouse
ABS And Traction Control Lights Came On After Washing...
After Washing My Car, The Abs And Traction Control Lights Came On Telling Me To Service Them. At First Everything Seemed To Be Working Fine...
Asked by Sherry Wehrman
Spark Plug Wires Installed Incorrectly?
Somehow Messed Up When Replacing Plug Wires, Terrible Miss And Knocks. The Cap Has Numbers, But I Need A Diagram To See What Is Run To Wrong...
Asked by Gerri Lynn Lester
Does Not Start There Is Gas In The Oil?
Truck No Start Condition, Oil Is Full Of Gas, I Have Now Changed The Oil, And It Starts Right Up But I Need To Find The Issue. I Feel It...
Asked by Terri Sprow
Replaced The Ignition Cylinder And Now It Will Not...
I Lost My Only Key With Key Fob, So I Swapped Out Cylinder With New One With Keys Already Programmed To It But, It Won't Allow Me To...
Asked by ToniMarie8913
Ask a new GMC question
