GMC
BodyBrakesClimate ControlDrivetrainElectricalEmissionEngineEngine CoolingExhaustExterior LightFuel SystemGeneralIgnitionInteriorSafetySecuritySteeringSuspensionTiresTrouble CodesWarning Lights
My 94 S15 Jimmy To Much Gas
Its A 94 S15 Jimmy 4x4 4.3 Vortech With 175000 Miles On It I Had It For One Year I Put A New Fule Pump,filter,new Flowmaster Exaust With No...
Asked by masonclinger71
Cannot Loosen The Brake Bleeder Bolts
Hi, I Have 1994 Gmc 1500 Truck. I Put New Brake Lines On Front To Rear, Now I Can't Loosen The Bleeder Bolts. Do You Know What Size They...
Asked by 71chevelle
REALLY Stuck Pitman Arm
I Have A 94 Yukon And Am Having Trouble With Removing The Pitman Arm.
I Removed The Relay Rod And Idler Arm And Got A Pitman Arm Puller But...
Asked by pulsti
1992 Yukon 2 Door
1992 Yukon 2 Door 103,000 350 5.7 Liter. I Can Not Get A Temperature Reading On My Gauge. I Have Replaced The Temperature Unit On The Block...
Asked by kgr624
76 GMC 2500 Fuel Problem
I Have An Old 76 Gmc That Will Run But Only When Fuel Is Poured Directly Into The Carburator. I Have Replaced The Fuel Pump. I Have Blown...
Asked by bdc961
Engine Tapping Sound And The Engine Exhaust Does Not...
1999 Gmc Jimmy 6 Cylinder 4wd. When I Start Engine After It Sits For Many Hours Or A Day Or Two There Is A Tapping Sound And The Engine...
Asked by cjlotti
Battery Over Charging
I Have A 2001 Jimmy. It Was Running Fine And Then One Day The Passenger Window Would Not Roll Down Using The Passenger Side Button, But It...
Asked by Sjbrown
Knocking Engine
I Have A 96 Gmc 3/4 Ton P/u 5.7l-128000 Miles. My Engine Knocks Really Loudly Upon Start-up But Goes Away After It's Warmed Up. I Also...
Asked by blkblur
4x4 Shift Question.
2004 Sierra,auto,4x4 Shift On Floor Hump.
Is It Normal For The Shift From 2 Wd To 4 Wd High To Make A Grinding Noise Sometime When Its Cold...
Asked by westy
Heater/AC Fan Only Works On High
My Truck Is A 1997 Gmc Sierra With A 5.7l Vortec Engine And 80,000 Miles. The Fan Only Works On High. The Blower Motor Itself Is Only 2...
Asked by chuck99999
Ask a new GMC question
