GMC


1990 GMC C3500 Spits And Spudders

1990 GMC C3500
I Have A 90 Gmc Dump With A 454 Motor. One Day I Was Driveing And It Started To Spit And Spudder And Back Fire. I Used My Scan Tool And...
1 ANSWER
Asked by 91gmcdump

1997 GMC Sonoma Mis-fire

1997 GMC SONOMA
I Have Replaced The Fuel Pump, Filter, Plugs, Wires. The Truck Is Still Mis-firing, Is The Problem The Ignition Coil ? Or Something Else...
3 ANSWERS
Asked by autoroach

1999 GMC Yukon

1999 GMC YUKON
Other Category Problem 1999 Gmc Yukon Engine Size Unknown Wheel Drive Type Unknown Automatic 212000 Miles It Seem Looks Like My Yukon...
1 ANSWER
Asked by gaddis02

1989 GMC Jimmy Head Gasket

1989 GMC JIMMY
I Have A 1989 Gmc Gypsy Jimmy I Have A Over Heating Problem I Loose Coolant But Its Not Leeking On The Ground Ill Drive About 45 Minutes And...
1 ANSWER
Asked by gypsyjon

2005 GMC C3500 Fuel Gage

2005 GMC C3500
Electrical Problem 2005 Gmc C3500 Engine Size Unknown Two Wheel Drive Automatic 115000 Miles The Fule Gage Shows Empty After Filling...
1 ANSWER
Asked by vern coley

1997 GMC Sierra Idle/running Problem

1997 GMC SIERRA
Need Some Information, Could Someone Give Me A Description On How A Bad Or Clogged Cat Converter Would Make A Vehicle Run. Thanks. Marc...
1 ANSWER
Asked by mjstrong

2004 GMC Yukon Oil Pressure Loss, Coolant Burn-off &...

2004 GMC YUKON
My Yukon Has Been Losing Some Oil Pressure About 800 Miles After An Oil Change. Concurrently, I Have Had To Start Refilling The Coolant...
1 ANSWER
Asked by bewhof

1991 GMC Jimmy GMC JIMMY HELP PLEASE!

1991 GMC JIMMY
Ok I Have A 1991 Gmc Jimmy With A 4.3 Liter Fuel Injection And It Is 4 Wheel Drive And I Had A New Motor Put In. So Now I Have A 93' Motor...
1 ANSWER
Asked by corey469

1999 GMC C1500 Trouble Code P1345

1999 GMC C1500
I Recently Had Both Heads (cracked) Changed On My Truck Because Of Overheating Due To Complete Loss Of Coolant. After The Work Was...
3 ANSWERS
Asked by fithgear

2001 GMC Sierra Abs Sensor

2001 GMC SIERRA
What' Involved With Replacing The Abs Sensor On The Front Wheels? Do You Need To Pull The Calipers And Rotors? What Would Be The Normal...
1 ANSWER
Asked by nCS
Ask a new GMC question