GMC P Codes (Powertrain)
Browse GMC P Codes (Powertrain) questions and answers. Choose a question that matches your symptoms.
237 discussions
1996 GMC Jimmy DTCs P0440,P0507
There Are Three Oxygen Sensors On The Exhaust,how Do I Test To See Which One Needs Replacement.or Is There Another Solution To These Codes?...
Asked by Dave-Brinston
1996 GMC Safari TROUBLE CODE COMING UP P0101
Van Starts Very Good But When Driving It It Is Like It Surges. Took It And Had The Transmission Flush Today But As Soon As I Left The Check...
Asked by angelgrounds
1996 GMC Sonoma P0300 CYLINDER 6 MISFIRE
This Vehicle Had The Distributor Replaced By A G.m. Dealership, Due To The Cap And Rotor Melting. Every Since Then When The Vehicle Is Under...
Asked by junior88
Code P0305?
The Truck Listed Above Has A 4.3 Vortex Engine. Truck Is Giving Me Check Engine Light. Replaced Spark Plugs, Wires, Crank Shaft And Camshaft...
Asked by xephre79
Check Engine Light, Horrible Missing, P0300 Code
I Was Leaving Work Just Started Hitting The Incline Going Up The Mountain An Truck Just Began Missing Horribly Shaking, Bogs When Giving It...
Asked by Jwin9569
Obd1 Plug Does Not Fit How Can I Retrieve Engine Codes
I Have An Obd 2 Port, But Will Not Link To My Scan Tool. The Obd1 Plug Does Not Fit. How Can I Retrieve Engine Codes? I Also Have A Abs...
Asked by Henry Garcia
1995 GMC Jimmy FAULT CODE PO441
Evaporative Emission Control System Incorrect Purge Flow. How Can I Check Which Part Needs To Be Replaced, Charcoal Cannister, Purge...
Asked by GMCBROKE1
P1860 TCC Solenoid
I Have A 99 Gmc Jimmy With 99,000 Miles, V6, 4.3, 4x4.
This Truck Has Given Me No Problems, But 2 Days Ago The Engine Light Came On, So I...
Asked by ronnie99
Trouble Code P1345
My Vehicle Is A 1999 Gmc Yukon With A 5.7 Engine And 120,000.
The "servie Engine Soon" Light Came On After I Replaced The Intake Manifold...
Asked by struxgl
P0741 P1860 Error Codes
I Have A 2000 Cadillac Deville W/140,000 Miles On It. I Had A Diagnostic Done This Morning And Those Are The 2 Error Codes That Came Up....
Asked by mrbeatzz
Browse other repair topics
Can’t find your issue?
Ask a new GMC question
