GMC Suspension
Browse GMC Suspension questions and answers. Choose a question that matches your symptoms.
178 discussions
2005 GMC Yukon Vibrating And Shaking
Suspension Problem
2005 Gmc Yukon V6 Two Wheel Drive Automatic 33000 Miles
My Yukon Is Shaking And Vibrating Bad When You Hit 60 Mph...
Asked by CORINA
Torque Specs Needed For Lower Control Arm Replacement
I Probably Need To Change My Lower Control Arm Or If The Lower Ball Joint Is Still In Good Condition, I Will Change Just The Bushings. Would...
Asked by Sweetie1965
Sounds Like A Rattling Noise Coming From The Front...
I Have Checked All Ball Joints. I've Changed Both Upper Control Arms Due To Worn Bushings. I've Changed Both Upper Ball Joints. I...
Asked by Sweetie1965
Removing Lower Ball Joints Issue
I Am Replacing The Upper And Lower Ball Joints On Both Side. Top Ball Joints Popped Out Without An Issue. Bottom Ball Joints On Both Sides...
Asked by bath2458
Is It My Shocks?
The Front Of My Car Rocks Side To Side. Took It In For Repair I Was Charged Almost $1,100.00 And Not A Year Later And It’s Doing It Again.
Asked by 325BigTex
Lower Control Arm
I Have Changed Upper Arm And Ball Joint And Now The Lower Arm, But The Tire Is Now Cambered In And. I Do Not Understand How To Correct This...
Asked by jiths2018
Service Stability
I Am Replacing The Wheel Bearing Column And Now Shows The Light Service Stability On.
Asked by Libo
Hi I Have A 2004 Gmc Canyon With Abs Issues. Changed...
Hi
I Have A 2004 Gmc Canyon With Abs Issues. Changed The Ball Joint, Barring And The Abs Censor On The Right Front Only. Put It All Back...
Asked by sparklz54
How Do You Remove And Replace The Upper Control Arm...
How Do You Remove And Replace The Upper Control Arm Bushings?
Asked by Anonymous
Hard Time Leveling
I Have A 2004 Envoy Xuv That Has Air Ride Suspension, And The Back Has A Hard Time Leveling When You Start Up. After It Sets In The Garage...
Asked by daniel6807
Browse other repair topics
SymptomsAuto RideBall JointCoil SpringLeaf SpringSits LowShockSpindleStrutSway BarTorsion BarUpper Control Arm
Can’t find your issue?
Ask a new GMC question
