GMC Tie Rod End

Browse GMC Tie Rod End questions and answers. Choose a question that matches your symptoms.

13 discussions

Outer Tie Rod End

2010 GMC ACADIA
I Just Had The Outer Tie Rod End Replaced About Seven Weeks Ago Give Or Take. I Noticed Some Clunking An A Little Vibration In The Front End...
6 ANSWERS
Asked by James kinton

Control Arms And Tie Rods

2009 GMC SIERRA
I Just Installed New Upper Control Arms And Inner And Outer Tie Rods On My Truck Listed Above (1500). I Screwed The Outer Tie Rod All The...
1 ANSWER
Asked by Joe72monty

Possible Broken Tie Rod

2007 GMC SIERRA
When Backing Up I Can Turn To The Right And Everything Is Fine, But If I Cut To The Left The Driver Tire Will Not Turn But The Passenger...
5 ANSWERS
Asked by Marc Jansen

My Envoy Started Making A Terribly Loud Squeaking...

2005 GMC ENVOY
My Envoy Started Making A Terribly Loud Squeaking Noise When I Turn The Wheel. It Also Feels Like Something Is Rubbing. This Is Not A Belt...
1 ANSWER
Asked by Anonymous

Have An 05 Yukon XL Denali, New Tires (balanced...

2005 GMC YUKON
Have An 05 Yukon Xl Denali, New Tires (balanced Checked Two Different Dealers) New U-joints, New Tie Rods (all Four) Plus 4 Wheel Alignment...
1 ANSWER
Asked by Anonymous

2005 GMC Sierra Front Wheel Movement

2005 GMC SIERRA
Hello, I Recently Had My Truck Up On A Lift And Noticed That There Was Some Play In Both Front Wheels (driver Side More Than Passenger Side...
4 ANSWERS
Asked by jamclemon

2003 GMC Envoy Tie Rod End

2003 GMC ENVOY
I Was Replacing A Bad Bearing Hub Assembly And Noticed Some Extra Play In The Driver Side Tie Rod. It Looks To Me Like The Bushing Has Gone...
1 ANSWER
Asked by Mailmanglen

Torque Specs For Tie Rods, Idle Arm And Pitman

2000 GMC JIMMY
Can You Please Tell Me Torque Specs For The Stabilizer Bars Both Nuts In Ft Lbs Or Inch Lbs .and Please Torque Specs For Tie Rods ,idle Arm...
3 ANSWERS
Asked by drelectric

2000 GMC Sierra Tie Rods

2000 GMC SIERRA
How Do I Know When My Tie Rods Need To Be Replaced?
1 ANSWER
Asked by schofie_1

1993 GMC C1500 Need A Answer Please

1993 GMC C1500
When Appling Brakes It Shakes Violently Not A Rotor I Replaced Inner And Outer Tie Rods Both Sides Could It Be The Ball Joints
1 ANSWER
Asked by cj417

Browse other repair topics

Browse by repair topic
SymptomsBoxCenter LinkColumnFluidHoseIdler ArmPitman ArmPumpRack and PinionSensorSteering WheelTie Rod End

    Can’t find your issue?

    Ask a new GMC question