GMC Engine

Browse GMC Engine questions and answers. Choose a question that matches your symptoms.

4,524 discussions


5.3 Flex Cranks, Won't Start. Verified All Fuses...

2003 GMC YUKON
5.3 Flex Cranks, Won't Start. Verified All Fuses Under Hood And Dash That I Know Of Are Good. Have Fuel Pressure To The Rails. Have...
3 ANSWERS
Asked by ouborn

Reduce Engine Power Message Displayed On Dash. What Is...

2003 GMC SIERRA
Reduce Engine Power Message Displayed On Dash. What Is The Issue
1 ANSWER
Asked by Anonymous

I Need To Replace The Cam And Crank Sensor On My Car...

2003 GMC ENVOY
I Need To Replace The Cam And Crank Sensor On My Car,can You Please Tell Me Where It Is Located, And How To Do It?
2 ANSWERS
Asked by Anonymous

I Have A 2003 Gmc Sonoma,, 4.3. The Truck Starts When...

2003 GMC SONOMA
I Have A 2003 Gmc Sonoma,, 4.3. The Truck Starts When I Add Fuel To The Throttle Body, But Other Than That It Won't Start. I've Changed The...
3 ANSWERS
Asked by lasurvivor47

Air Intake If So Can It Be Clean

2003 GMC YUKON
Air Intake If So Can It Be Clean
1 ANSWER
Asked by Anonymous

SOmetimes When I Start The Engine The Yellow Engine...

2003 GMC C1500
Sometimes When I Start The Engine The Yellow Engine Light Comes On And It Says "reduced Engine Power" The Truck Then Only Has Partial Power...
2 ANSWERS
Asked by Anonymous

We Have Replaced With New OEM Parts- Thethrottle Body...

2003 GMC SAVANA
We Have Replaced With New Oem Parts- Thethrottle Body Which Includes The Idle Air Control Valve And The Tp Sensor On This 3500 Series...
1 ANSWER
Asked by Anonymous

My Car Turns Off While I Am Driving. I Can Start It...

2003 GMC ENVOY
My Car Turns Off While I Am Driving. I Can Start It Back Up Right Away But Then 5 Minutes Later It Will Turn Off Again. Any Ideas?
1 ANSWER
Asked by Anonymous

Engine Started Running Rough/stalling, Got A...

2003 GMC SIERRA
Engine Started Running Rough/stalling, Got A Diagnostic Code Of Maf, And Then Thermostat/sensor, And The O2 Sensor Bank 1.i Replaced All 3...
2 ANSWERS
Asked by rogerballesteros

Engine Will Not Start

2003 GMC SONOMA
I Have A 2003 Gmc Sonoma 4.3. The Engine Cranks, But Won't Start. I Have A Innova Scan Tool And Only One Code Appeared. (p0102). It...
13 ANSWERS
Asked by lasurvivor47

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickDrain PlugFlexplateFlywheelGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil CheckOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new GMC question