GMC Engine
Browse GMC Engine questions and answers. Choose a question that matches your symptoms.
4,524 discussions
1993 GMC Van PO44 Error Code
I Have A 93 5.7l V8 Vandura That Is Running Rough. It's Surging At Cruise Speeds, Jolting When You Take Off From Stops, Idling Bad At First...
Asked by TyJ93
Engine Died Without Warning, Will Not Turn Over Even...
Engine Died Without Warning, Will Not Turn Over Even If Jumped.
What Could Be Wrong?
Asked by Anonymous
I Have A 1993 Gmc Sonoma With A 2.8 V6 I Pulled Into A...
I Have A 1993 Gmc Sonoma With A 2.8 V6 I Pulled Into A Mini Mart Shut It Off Now It Wont Start, It Just Turns Over
Asked by Anonymous
The Truck Idles Sounds Good.when Pressing The Gas It...
The Truck Idles Sounds Good.when Pressing The Gas It Bogs Down As If There's No Fuel, Why? There's Gas In It.
Asked by Anonymous
Had Freeze Plugs Replace, Thermostat Replaced Twice (...
Had Freeze Plugs Replace, Thermostat Replaced Twice (185 Degree I Think, Stock As Per Parts House), System Back Flushed. Engine Will Heat Up...
Asked by Anonymous
It Overheat One Day I've Replaced The Timeing Chain...
It Overheat One Day I've Replaced The Timeing Chain And Water Pump And It Still Will Not Start
Asked by chicodugan
The Truck Froze Up And Is Leaking Water Very Heavy...
The Truck Froze Up And Is Leaking Water Very Heavy From The Rear Of The Engine Running Down Both Sides Of Oil Pan. I Suspect Freeze Plugs...
Asked by geraldkirby
Engine Does Not Want To Start In Cold Weather,unless...
Engine Does Not Want To Start In Cold Weather,unless You Use Starting Fluid
Asked by Anonymous
My 93 Gmc Sierra 4.3 Ran Out Of Gas And I Put New Gas...
My 93 Gmc Sierra 4.3 Ran Out Of Gas And I Put New Gas Into It And Now It Will Not Start, I Checked The Spark And It Is Getting Fuel To The...
Asked by 666chuck666
Why Won't My Crankshaft Turn? Belt Keeps Breaking...
Why Won't My Crankshaft Turn? Belt Keeps Breaking, Running Hot.
Asked by Anonymous
Browse other repair topics
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickDrain PlugFlexplateFlywheelGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil CheckOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring
Can’t find your issue?
Ask a new GMC question
