GMC Engine Symptoms

Browse GMC Engine Symptoms questions and answers. Choose a question that matches your symptoms.

3,066 discussions


Hard Start Up In The Morning

2009 GMC TERRAIN
Hello In The Morning It Does Not Start Up From First Try And The Next Problem Is The Idle Is Too Low And When I Put It In Drive The Rpm's...
15 ANSWERS
3 IMAGES
Asked by Mohamad kibrit

Misfire

2009 GMC ACADIA
My Check Engine Light Came On And The Truck Started Running Like Crap. Took It To Autozone. The Codes Said That All Six Cylinders Were...
2 ANSWERS
Asked by golfnlance

2009 GMC Sierra Cylinder 8 Misfire

2009 GMC SIERRA
I Have Had A Cylinder 8 Misfire On My Truck For A Moth And Have Replaced The Spark Plug, Wire, Ignition Coil, Fuel Injector And Have Done...
3 ANSWERS
Asked by Lax4life

Electricty

2009 GMC YUKON HYBRID
2009 Yukon Hybrid Was Rear-end At 70mph. It Has Been Repair And Retuurn To The Next Morning Will Not Start ,and Read Out Everything Need To...
1 ANSWER
Asked by james534us

2009 GMC Acadia GMC Acadia 2009 Engine Fumes

2009 GMC ACADIA
Gmc Acadia 2009, Mileage 350 First Hand, Unusual Smog From Exhaust Pipes, Blackened Exhaust Pipes From Inside, Suspected Oil Burn Smells...
1 ANSWER
Asked by tariq54

No Start After Pulling Engine For Timing Chain...

2008 GMC ACADIA
I Recently Purchased This Car As A Mechanic Special Due To A Loose Timing Chain Causing The Cams To Go Out Of Time. After Pulling The Engine...
1 ANSWER
2 IMAGES
Asked by Ckramlich

Power Loss?

2008 GMC SIERRA
I Have The Truck Listed Above At Half Throttle, My Truck Moves Like A Turtle. I've Notice On My Dash Prd321 Usually Has A Line Indicator...
1 ANSWER
Asked by Slyau

Code Repair Problems, Not Starting?

2008 GMC ACADIA
Body Throttle Was Dirty With Oil. I Cleaned It Then Put Code Ready On And These Codes Came Up And I'm Not Sure If I Just Need To Replace...
3 ANSWERS
3 IMAGES
Asked by Nikala

No Power Up Steep Hill, Low Speed?

2008 GMC SIERRA
I Do A Lot Of Fishing In The Back Country. My Trailer Weighs 1,800 Lbs And Another 500lbs Of Gear In The Bed In The Bed. My Truck Works...
1 ANSWER
Asked by Happyfisher

Codes P1174 And P1175, Vacuum Leak?

2008 GMC ACADIA
While Checking For A Vacuum Leak Using A Smoke Machine. While Running The Smoke Though The System I Noticed Smoke Was Coming Out Of The Oil...
5 ANSWERS
1 VIDEO
1 IMAGE
Asked by Crzyfo0

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadDipstickDrain PlugFlexplateFlywheelGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnock SensorMAP SensorMass Air Flow SensorMountOilOil ChangeOil CheckOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new GMC question