Ford Ranger Instrument Cluster Gauges
Browse Ford Ranger Instrument Cluster Gauges questions and answers. Choose a question that matches your symptoms.
149 discussions
Tachometer Needle Intermittent Not Working Properly?
Hi,
My 2.5 Turbo Diesel's Tachometer Jumps And Even Stop Giving Readings From Time To Time.i Expect It Might Be The Sender Unit On...
Asked by Ronnie du Plooy
No Heat And Temperature Gauge Not Working?
Truck Does Not Get Hot And Temperature Gauge Does Not Move.
Asked by G3
Dash Light For Speedometer Not Working
The Dash Light For The Speedometer Isnt Working. The Other Lights In The Insturment Cluster Work As Does The Dimmer Switch. I Replaces...
Asked by jdstephens
Temp. Guage Will Go About Half Way And Then Goes Back...
Temp. Guage Will Go About Half Way And Then Goes Back To Cold. There Is Heat But Is Not That Good Fluids Are Full.
Asked by Anonymous
Temperature Gauge Not Working Properly
The Temperature Gage Won't Move Unless I Turn On The A/c. So I'm Not Sure What To Look For To Fix The Issue. Also I've Noticed I...
Asked by Gonzo73
Gas Gauge Issues
I Have A 04 Ford Ranger It Is A V6 3.0 2wd And Rear Wheel Drive. I Am Having Trouble With The Gas Gauge It Sometimes Works And Other Times...
Asked by ashleythompson
Bakkie Cuts Out When Driving
My Fuel Gauge Was Not Working So I Changed The Float In The Tank But Since Then It Is Spitting And Backfiring And Missing And Then Cut Out...
Asked by carien
Temperature Gauge Dropping To Almost Cold At Highway...
-replaced The Thermostat (twice) Along With The Water Pump And The Overflow Tank Cap.
-heater Core Is Not Clogged.
-i Have Burped The...
Asked by csosa123456
Turn Signals, Window, Wipers, Radio, And Speedometer...
After Switching The Motor Out My Mechanic Returned The Truck And The Turn Signals, Window, Wipers, Radio, And Speedometer Will Not Work.
Asked by Sheila Louise
Hello, I Have A 2003 Ford Ranger 3.0L And Was...
Hello, I Have A 2003 Ford Ranger 3.0l And Was Replacing The Bulb In My Dome Light. It Sparked For A Second And Now I Have No Wipers...
Asked by Anonymous
Browse other repair topics
Can’t find your issue?
Ask a new Ford Ranger question
