Ford Computer Read Codes
Browse Ford Computer Read Codes questions and answers. Choose a question that matches your symptoms.
103 discussions
Could My PCM Be Fried
I Was Driving On The Interstate And Out Of Nowhere The Ceramic Piece Of Spark Plug Blew Out. Unplugged One Coil Pack And Melted Some Of The...
Asked by Catpek5
Not Sure What's Going On.
I Have A 1998 Ford Explorer That Worked Fine, We Went On Vacation No Problem. When We Got Back The Truck Stayed Parked For 2 Days And Then...
Asked by MSeals87
1998 Ford Contour Changed Motor
I Have Changed The Motor In My Contour. Does The Computer Need To Be Reset/wiped Out, Or This Should Not Matter.
Asked by smesser
1998 Ford Explorer ECM
Electrical Problem
1998 Ford Explorer 6 Cyl Four Wheel Drive Automatic
I Replaced My Ecm, My Scan Tools Would Not Communicate I Tried...
Asked by JoeMon11
Getting Code P0141, Need To Get A Wiring Diagram And...
Getting Code P0141, Need To Get A Wiring Diagram And Start Troubleshooting, Also Is There A Fuse For The 02s Heating Element.
Asked by j.stieg
1997 Ford Taurus Codes
I Have 2 Codes Coming Up Air Intake And Code 1451. What Do I Have To Do To Get Rid Of These Codes In Order To Get My Car Inspected
Asked by justyce20032003
1997 Ford F150 Pcm?
Had A Plug Blow Out Fixed It ,then Engine Just Turned Over And No Fire And No Fuel ,checked Fuses ,relays And Then Pcm After No Codes...
Asked by belle35gurdon
Do I Need A MK 808 Scanner To Bleed The Brakes?
I Am Switching Out My Abs Hydraulic Pump And Modulator For A Working One....
Will I Need This Mk 808 Scanner To Properly Bleed The New Unit...
Asked by mgupland
Scanner Code Comes Up 15- Problem In Electronic...
Scanner Code Comes Up 15- Problem In Electronic Control Assembly, Problem With Keep Alive Memory. What Does That Mean?
Asked by dbrennan714
Browse other repair topics
Clear CodesDiagnostic Connector ALDLEstimateFuseLimp Mode - Reduced PowerLocationMonitor Not ResettingNo CommunicationProgramRead CodesReplace/RemoveUpdate
Can’t find your issue?
Ask a new Ford question
