Advertisement

Could my PCM be fried

172,000 MILES • 2.5L • 4 CYL • 2WD • AUTOMATIC
Avatar
CATPEK5
  • MEMBER
  • 1 POST
I was driving on the interstate and out of nowhere the ceramic piece of spark plug blew out. unplugged one coil pack and melted some of the main harness and eventually quit running. So I replaced all plugs and wires, fixed the harness and replace the coils checked all fuses.tried hooking a OBD scan tool and it says unable to communicate. The truck will not start check engine light is on when the key is on.
Feb 7, 2019 at 11:28 PM
Advertisement
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
Good morning,

It is possible, but I would start by checking all the fuses with a test light to verify power to both sides.

Did you solder and shrink wrap all the wires that were damaged?

Roy
Feb 8, 2019 at 12:58 AM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle