Ford Computer No Communication
Browse Ford Computer No Communication questions and answers. Choose a question that matches your symptoms.
34 discussions
OBD11 Fails To Communicate
Turn The Key Theft Light Does Not Turn On For Three Seconds, The Fuel Pump Does Not Turn On And Prime, Try To Start. The Starter Does Turn...
Asked by Bob Stoddard
Obd2 Not Communicating
Truck Has J1850 Plug, I Have Adapter To Obd2 Monitor, Says Communication Error. Between Data+ And Data- Pins, With Engine Off, Should There...
Asked by skjch
Will Not Start, OB2 Reads No-link?
Put A Rebuilt Motor And Transmission In, It Has Less Than 5 Miles On It. Now It Will Not Start Or Turn Over Ob2 Reads No-link. Replaced Pcm...
Asked by william hughes
No Communication
L Just Got This Suv Last Sat (8.19.17).
The Check Engine Light Randomly Comes On, Goes Off When You Shut It Off. Start It Go Drive...
Asked by Mav.79.4x4
99 Ford Ex Computer
99ford Ex Data Lost On Computer Can Not Pass Emmission Inspection Had New Wires And Plugs 2/10/11 Car Runs Good Went For Inspection Failed...
Asked by .abaraham kaminowitz
OBD2 Dealers Here Cannot Connect To The Port To Run A...
The Port Accepts An Obd1 Style Connector But Reads Nothing. Is It Possible That In 1997 They Have Obd2 But Fit With An Obd Style Port?
Asked by Bharik
Cranks Not Start And Will Not Communicate With The...
My Car Won't Communicate With The Scanner Any More. It Was Working, Now It Isn't. My Car Has No Spark, The Fuel Pump Won't Come...
Asked by Anonymous
Will Not Start Or Run
I Have A 1997 Ford Crown Victoria That Will Not Run. I Had A Lower Ball Joint Break On The Car And Had To Get It Towed Home I Replaced It...
Asked by dirtbag3116
No Communication Obd2?
I Have Tried Several Scan Tools With The Same Result No Communication. I Tested The Pins On The Obd2 Port I Have Twelve Volts On Pin 16...
Asked by Ricardo Matias
Browse other repair topics
Clear CodesDiagnostic Connector ALDLEstimateFuseLimp Mode - Reduced PowerLocationMonitor Not ResettingNo CommunicationProgramRead CodesReplace/RemoveUpdate
Can’t find your issue?
Ask a new Ford question
