Dodge Ram Cylinder Head

I Have The Truck Listed Above1500, That Was Misfiring On Cylinder Number 6. Upon Taking The Valve Cover Off To Inspect It, I Saw The Rocker...

Good Evening, I Replaced The Head Gasket And Put Everything Back Together. The Engine Is Now Skipping And Showing A Few Codes That I Don...

How Can I Make Sure It Was Put Back On Properly Before I Put The Engine Back Together?

Need To Know The Tightening Sequence And Torque Pounds On The Bolts And Sequence For Applying The Torque To The Head Bolts.

My Problem Is If I Remove The Cam Gear Tierap The Chain To The Gear Will The Cam Rotate And If It Does Is This Dangerous For The Valves

Couple Days Age Water Pump Went On My Truck.replaced Pump And Find Out Thats Not Only Thing Wrong With It Blew Head Gasket. Now Looking At...

I Had Head Gasket Replacement Crank Up And Drove Parked It, Now No Start And Not Getting Power To Fuse 30 Through 35 And Fuel Pump Relay...

Just Replaced Head Gaskets And Timing Chain. Now Engine Is Hard To Start And Barely Idles. No Trouble Codes. Motor Ran Fine Before Repair.

Hey Guys! As Always Thanks For All The Help. I Need The Torque Specs An Tightening Sequence For The Head Bolts On A 2004 Dodge Ram 1500 3.7l...

Water Pump Went Out, Motor Heated And I Think Head Gasket Bad Or Warped Heads. I'm Handy Around This Type Of Work But Do Not Do For A...