what are the torque specs and tightening sequence

2004 DODGE RAM
175,000 MILES
Avatar
MIKEDEROUIN88
  • MEMBER
  • 137 POSTS
Hey guys! As always thanks for all the help. I need the torque specs an tightening sequence for the head bolts on a 2004 dodge ram 1500 3.7l. Is is a2wd with a standard transmission
Jul 7, 2012 at 8:02 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
RASMATAZ
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 75,992 POSTS
Tighten the bolts in sequence using the following steps and torque values:
Step 1: Tighten bolts 1-8, 27 N.m (20 ft. lbs.).
Step 2: Verify that bolts 1-8, all reached 27 N.m (20 ft. lbs.), by repeating step 1 without loosening the bolts. Tighten bolts 9 thru 12 to 14 N.m (10 ft. lbs.).
Step 3: Tighten bolts 1-8, 90°. (Fig 3).
Step 4: Tighten bolts 1-8, 90°, again. Tighten bolts 9-12, 26 N.m (19 ft. lbs.)
Image (Click to enlarge)
Attached Media
Jul 7, 2012 at 8:33 AM
Advertisement
Avatar
MIKEDEROUIN88
  • MEMBER
  • 137 POSTS
Thank you so much for the fast response.
Jul 7, 2012 at 12:06 PM
Avatar
RASMATAZ
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 75,992 POSTS
You're welcomed
Jul 7, 2012 at 7:50 PM