Dodge Dakota Engine

Someone Playing Around Pulled Out Some Of The Pin Up.

The Timing Chain And Tensioner Give A Different Engine Sound Than Before, Since Its Tighter?

Does It Go Before The Gasket Is On Or After An On Top Or Both? Any Tips To Get Inside Pan To Get A Few Pieces Of Gasket Out? I Got Engine...

I Noticed After Replacing The Timing Chain, [marked An At Tdc With Dots In Center] And Getting The New Chain And Sprockets Back In The Exact...

What Are All The Torque Specs In Ft Lbs. For These Reinstalled Parts? And Which Ones Need The Blue Loctite Or Any Thread Sealer Or Teflon...

I'm Trying To Get That Harmonic Balancer Pulled To Get To The Timing Cover. I Am Having A Tough Time Unbolting That Huge 1 And 1/4...

When I Replace The Valve Cover Gaskets What Should I Look At When The Covers Are Off? Should I Check For Loose Lifters Or Clean It Up Any?...

Okay, So When I Turn The Truck On There Are Sometimes It Fires Right Up With No Problem And Sometimes It Likes To Sputter Go Below 900 Rpms...

Sometimes It Will Idle And Sometimes It Won't Until I Give It Some Gas And Hold The Pedal A Little . Same With It Cranking.

After Driving And Turning It Off It Does Not Always Want To Start, But Not Always It Is Intermittent. If I Let It Sit For 15 To 20 Minutes...