Dodge Engine

Browse Dodge Engine questions and answers. Choose a question that matches your symptoms.

12,412 discussions


Idles Great And Shuts Off?

1996 DODGE RAM
Broke Down. Backfired And Quit Running Wouldn’t Start. Changes Out Plugs And Wires, Cleaned Throttle Body, Even Changed Out Tps. It Starts...
3 ANSWERS
1 IMAGE
Asked by dnjfun13@gmail.com

Overdrive Switch Inoperable?

1996 DODGE VAN
Hello. The Overdrive Switch, Located On The Dash, Left Side Of The Steering Column, Lights Up When Engaged, Yet Has No Effect Now. This...
11 ANSWERS
4 IMAGES
Asked by David Endacott

No Start, Got New Crank Position Sensor, New Coil?

1996 DODGE RAM
I Have A No Start,got New Crank Position Sensor, New Coil.. It Would Start Then Die Until Warmed Up Then Ran Fine.. Now I Turn Ignition On...
12 ANSWERS
21 IMAGES
Asked by Downinthefrontrow

I Replaced My Radiator The Transmission Line, The...

1996 DODGE DAKOTA
The Clip Broke I Got A New One I Can't Get It To Go Together It Won't Clip Together. Do I Need To Push Harder?
1 ANSWER
Asked by Walter Ganly

Turns Over But Will Not Start?

1996 DODGE RAM
The Truck Ran Fine With No Issues. I Went To Start It Yesterday And It Acted Like The Battery Was Drained. I Charged It And Now It's...
3 ANSWERS
Asked by TruBluRookie

Will Not Stay Running?

1996 DODGE TRUCK
I Have The Truck Listed Above, It Had A 5.2 Swapped It Out For A 59 And It Ran Fine. One Day Going Down The Road It Just Shut Off Of The...
1 ANSWER
Asked by Darn ram

How To Change A Serpentine Belt?

1996 DODGE DAKOTA
How To Get The Tensioner Loose So The Belt Will Come Off?
1 ANSWER
4 IMAGES
Asked by Nibs58

ECU Fuse Keeps Blowing?

1996 DODGE RAM
Vehicle Keeps Blowing The Ecu Fuse And I’m Not Sure Where To Look, I’ve Looked All Under The Hood And Can’t Find The Short. Vehicle...
1 ANSWER
Asked by John2344

Car Will Not Start?

1996 DODGE AVENGER
Car Listed Above Is An Es. The Solenoid Clicks But The Starter Wont Crank. The Battery Is Fine, No Starter Relay As Far As I Know. Any Ideas...
5 ANSWERS
2 IMAGES
Asked by Benji134

New Ignition Cylinder Does Not Activate Starter

1996 DODGE RAM
I Replaced My Ignition Switch Lock Cylinder As The Old One Had Broken. After Installing, It Will Not Crank. Everything Else Comes On As...
3 ANSWERS
1 IMAGE
Asked by Ponyrider

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBalance ShaftBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickDrain PlugEstimateFlexplateFlywheelGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil CheckOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new Dodge question