Dodge Brakes

Browse Dodge Brakes questions and answers. Choose a question that matches your symptoms.

1,257 discussions


Brakes Will Not Bleed

1998 DODGE CARAVAN
Hi, I Changed Brake Lines, Put Fluid In Master Cylinder, Opened Bleeder Screw, Pumped Pedal, No Fluid Comes Out Of Any Of The Four Bleeder...
1 ANSWER
Asked by tmerer

Rear Brakes

1998 DODGE RAM
Lost The E-brake Could Be A Cable If It Was Destroying My Rotors I Would Feel It In The Pedal Or Something. I Cannot Be Driving Around With...
2 ANSWERS
Asked by johnny71

After Replacing The Brakes Shoes The Drum Would Not Go...

1998 DODGE DURANGO
Replaced Drum Brakes And The Drum Would Not Go Back On. We Cleaned The Lip Of The Drum Amd Had The Adjuster All The Way In, But The Drum...
6 ANSWERS
Asked by Dakota Campbell

NO BRAKES AT ALL

1998 DODGE DURANGO
My Son Put New Brakes And Rotors On My Truck Two Days Later It Starting Making A Liud Roaring Noise Then Absolutely No Brakes At All Brake...
1 ANSWER
Asked by nina/smmy

No Brakes

1998 DODGE DURANGO
Just Had New Brakes N Rotors Put On Two Days Later Started Making Loud Roaring Noise Now No Brakes At All
1 ANSWER
Asked by nina/smmy

Brakes Locked Up On A 1999 Dodge Durango

1998 DODGE DURANGO
We Had The Master Cynlinder Fixed And Everything Was Fine For About 2 Mths And Then The Front End Messed Up And We Repaired The Ball Joint...
3 ANSWERS
Asked by dlowery

1998 Dodge Dakota Brakes

1998 DODGE DAKOTA
Stepped On Brakes Straight To The Floor Still Had Fluid About Half Added Some Brakes Worked A Few More Days Then Again Nothing Can't Find A...
1 ANSWER
Asked by mikemaddox2

1998 Dodge Durango Front Breaks

1998 DODGE DURANGO
Are My Breaks Interchangable With Any Other Kind That May Be Cheaper To Buy Because I Can Not Afford The One That Are Made. For My Truck And...
1 ANSWER
Asked by dani lee

1998 Dodge Neon Front Brakes

1998 DODGE NEON
Replaced Front Calipars And Pads Now Front Right Wheel Gets Hot And Smokes Bleed The Front Wheels Wondering If There Is A Air Lock On This...
1 ANSWER
Asked by todd loughnan

Master Cylinder Replacement

1998 DODGE STRATUS
When I Put The New Master Cylinder On I Tightend All Of The Brakelines And The Mounting Bolts Then I Bleed The Brake Lines When I Started...
1 ANSWER
Asked by bcortiss

Browse other repair topics

Browse by repair topic
SymptomsABSAdjustBacking PlateBleed - FlushBoosterBrake FluidCaliperDrumHose (Flex)LeakLineMaster CylinderPadsParking BrakePedalProportioning ValveRotorShoeWheel Cylinder

    Can’t find your issue?

    Ask a new Dodge question