Chrysler 300 Suspension
Browse Chrysler 300 Suspension questions and answers. Choose a question that matches your symptoms.
27 discussions
Rubbing Noise When Turning?
I Have Seen This Before On A Ford Edge And Guessing This Is Common? It Feels Like There Is Rubbing, I Believe It's The Strut Spring On...
Asked by Bhamdoc1973
Tires Rubbing On Spindle Knuckle After Replacing The...
I Recently Replaced My Front Lower Control Arms, But Once I Was Done I Noticed That The Driver Side Tire Was Rubbing On The Spindle Knuckle...
Asked by rudy4545
Passenger Side Suspension Rattle
Hi, I’m James And I Have Been Hearing A Sound For The Past 4ish Months, It Started Out Very Small And Has Progressively Gotten Worse. It...
Asked by James Reneger
2008 Chrysler 300 Wander At Highway Speeds
I Recently Purchased This Car, Trading In A 2001 Town & Country Van. I Can't Tell If It Is Because I Switched From Front Wheel Drive To Rear...
Asked by Centuryjack
2008 Chrysler 300
Suspension Problem
2008 Chrysler 300 6 Cyl Two Wheel Drive
Knocking On Front Suspention When There Is Rapid Up&down Movment Wheels
Asked by Hatton
Front End Noise While Driving Over Bumps/rough Road?
My Car Has Been Making Noise From The Front End While Driving Around 10-40 Mph Over Bumps/rough Road. It Sounds Like The Strut Mount Or...
Asked by Extrabad8
Front Left Tire Stopped Rotating
A Couple Days Ago In Minnesota My Rwd 300c Got Stuck Twice In 2 Different Snow Drifts During A Blizzard With Wind Gusts Of 50 Mph+...
Asked by Lacey Gilles
2007 Chrysler 300 Strut
1. Crrysler Japanese Version, Is The Underneath Part Is It Same As The Mercedes Benz E Class Parts?
2. I Am In Thailand, Bangkok I Want...
Asked by anandroch
When Driving Around 45 MPH A Front-end Vibration...
Around 45 Miles Per Hour A Front End Vibration Starts And When I Hit The Brakes It Gets Worse And Then It Goes Away After A Bit - There Is...
Asked by Charles Wilbur
Ball Joint Removal
Been Fooling With This Car For 2 Days, Nothing Is Working As Far As The Ball Joint Coming Out. I Have A Press But Due To The Shape Of The...
Asked by Naser Naser
Browse other repair topics
Can’t find your issue?
Ask a new Chrysler 300 question
