Chevrolet S-10 OBD1 Codes
Browse Chevrolet S-10 OBD1 Codes questions and answers. Choose a question that matches your symptoms.
13 discussions
1994 Chevy S-10 Code 23 Help
After Looking Up This Code, "intake Air Temp Cool" Do I Need To Replace A Sensor? Service Engine Light Will Come On After Engine Has Warmed...
Asked by samis10
1994 Chevy S-10 MIL Code 16 System Voltage Out Of...
The Truck Maintains Around 14 Volts But After Driven Couple Miles Service Engine Light Comes On After I Shut The Truck Off And Restart It...
Asked by rriley
Code 043
I'm Getting A Code 043 Esc Module That Comes And Goes. It Comes On Mostly When It Gets Colder Outside Or When First Started, Then Will...
Asked by novaclone
1993 Chevy S-10 Trouble Code 43, And No Go.
Hi. I Get The The Trouble Code 43, And Just Recently When I Start The Truck, It Wont Start Up Right Away. It Takes About 3 Times To Get It...
Asked by cyberpunk64bit
1993 Chevy S-10 Code 43
I Have A 93 S10 P/up 2wd 4.3 Tbi Z Engine. The Code I'm Getting Is For The Knock Sensor/ Esc Problem. This Engine Had The Heads Replaced...
Asked by awolmind
1993 Chevy S-10 Error Code 43
I Have Replaced The Knock Sensor And Esc Module And Still Get The Error 43 After Driving A While, The Check Engin Light Does Not Stay On But...
Asked by tpkaye459
Code 14 - High Coolant Temperature Indicated
I Have The Vehicle Listed Above With A 4.3 L V6 5 Speed. For The Past Month I Have A Code 14 (high Coolant Temperature) Code Intermittent....
Asked by Scooter18
1991 Chevy S-10 Code 34
When The Code 34 Comes Up It Says' Circuit To High/ To Low'.what Circuit Is It Refering To. Idle, Voltage ? . Thanks ,billy (new Map Was...
Asked by billyo
Browse other repair topics
Can’t find your issue?
Ask a new Chevrolet S-10 question
