Chevrolet S-10 Drivetrain
Browse Chevrolet S-10 Drivetrain questions and answers. Choose a question that matches your symptoms.
640 discussions
Hydraulic Clutch Line.
1996 Gmc Sonoma Sl 205 Kilometers 2.2 Motor 5 Speed Trans. 2 Wheel Drive. I Am Replacing The Clutch Assembly. How Do You Release The Line...
Asked by Jim 1944
Clutch Problems
2004 Chevy S-10 4 Cylinder I Replaced The Clutch, Pressure Plate, Throwout Bearing And Turned The Fly Wheel Lightly Approximately 30,000...
Asked by Michael88
Clutch Problems
I Have A Chevy S-10 94 5speed Manual Over 214k
I Have Replaced The Clutch And Pressure Plate And Bearing. I Put It All Back To Gether And...
Asked by thekewtness
Wheel Bearings
I Have A 2000 S10 4wd With Manual Trans And 4.3 V6
It Has 74000 Miles My Question Is How Hard Are The Front Wheel Bearings To Replace And...
Asked by deadjerry
Clutch
Chevy 99' S10 2.2l 5 Speed Roughly 110,000 Miles, When I Push The Clutch In All The Way To The Floor And Let Off The Slightest Little Bit...
Asked by heeeeyhowdy
Clutch Master Cylinder Line Replcement
Chevy S-10 1998 160k 2.2liter 2 Wheel Drive
I Had An Exhaust Leak Which Melted My Supply Line From The Master Cylinder To The Slave...
Asked by 1998s10tucsonaz
Front Axle Not Engaging When Button Is Pushed
'94 S10 With 140k 4.3 Auto With Push Button, (electronic) 4 Wheel Engagement. The Lights On The Button Illuminate And The Vehicle Will Go...
Asked by coastn
Not Down Shifting Properly
I Have A 1994 S10 Blazer. Two Wheel Drive, 4.3 Vortec V6, Auto Trans. 93,500 Miles.
I Had The Trans Rebuilt About 2000 Miles Ago. Recently...
Asked by I_hate_my_truck
Slave Cylinder
Hello This Is My First Post... : )
I Have A 98 Chevy S-10 Pickup With A 5 Speed And 2.2l
When Its Summer Time My Clutch Is Fine I Have...
Asked by indyguy32
Browse other repair topics
Can’t find your issue?
Ask a new Chevrolet S-10 question
