Chevrolet 2500 Engine

Browse Chevrolet 2500 Engine questions and answers. Choose a question that matches your symptoms.

54 discussions

TPS Location

2008 CHEVROLET 2500
Where Is The Tps And How To Change It? Thank You
1 ANSWER
1 IMAGE
Asked by Jessie473

Codes P1516, P2135, P0220, And P0120, Throttle Body?

2005 CHEVROLET 2500
The Truck Listed Above Is An Ls, Ext, 4x4. Vin: 1gchk29u35e248266. Replaced Throttle Body, Including The Attached Tps, Oct. 2022...
2 ANSWERS
11 IMAGES
Asked by rexblanton

Coolant Pushing Out Of The Surge Tank - Engine...

2005 CHEVROLET 2500
I Had Coolant Pushing Out Of The Surge Tank So I Thought Maybe Just Need A New Pressure Cap Replaced That With An Oem One From Gm And The...
1 ANSWER
Asked by Mkahnert5@gmail.com

No Starter Operation?

2005 CHEVROLET 2500
My Truck Hd2500, Crew Cab Will Not Start Sometimes. I Can Drive Somewhere Come Back Out And It Won't Turn Over. Makes A Sound Like The...
3 ANSWERS
1 IMAGE
Asked by Dmackenr

Transmission Slips And Engine Running Rough

2005 CHEVROLET 2500
Recently My Truck Started And Having A Problem Taking Off From A Stop, The Transmission Is Slipping When I Take Off. Last Week It Started...
1 ANSWER
Asked by Michael McCormick

Rear Main Engine Oil Leak

2004 CHEVROLET 2500
How Do I Repair This?
1 ANSWER
1 IMAGE
Asked by Jack Zerkie

No Crank, No Start

2004 CHEVROLET 2500
Lights On The Dash Are On. Gear Selection Is Illuminated But Not Underlined Or Any Indication Of What Gear The Trans Is In. Key To Start And...
1 ANSWER
8 IMAGES
Asked by morganchr

My Truck Is Hard To Start?

2003 CHEVROLET 2500
So, I Just Bought This Truck And When You Go To Crank The Truck And Turn The Key To The Run Position It’s Trying To Crank And Takes Like 6...
1 ANSWER
3 IMAGES
Asked by Ksmith04

Randomly Going Into Limp Mode?

2003 CHEVROLET 2500
Hey Guys, I’m Going Crazy With My 6.0! It’s Randomly Going Into Limp Mode, Constantly When I Need It Most! The Wires Had Been Touched...
3 ANSWERS
8 IMAGES
Asked by Nate2003chevy

Cam Sensor Problem

2003 CHEVROLET 2500
I Have 7.6 Volts Leaving The Ecm To The Cam Positioner. I Give The Wire 12 Volts And The Truck Runs Fine. Could It Be A Bad Ecm?
2 ANSWERS
8 IMAGES
Asked by RDGll

Browse other repair topics

Browse by repair topic
SymptomsBlockCamshaftComputerCrankshaftCylinder HeadGround StrapMass Air Flow SensorOil LeakOil FilterOil Pressure SensorOxygen SensorRebuildStarterThrottle BodyWiring

    Can’t find your issue?

    Ask a new Chevrolet 2500 question