Buick Regal Camshaft

Browse Buick Regal Camshaft questions and answers. Choose a question that matches your symptoms.

13 discussions

Where Is The Cam Shaft Position Sensor Located?

2014 BUICK REGAL
My Car Started Running Sluggish And Shifting Was Clunky. I Have The Car Listed Above Premium 1 Turbo. All Of The Sudden The Check Engine...
7 ANSWERS
8 IMAGES
Asked by dpeace23

2001 Buick Regal Sticky Lifters

2001 BUICK REGAL
When I Start My Car In The Morning It Takes About 15 Or More Minutes For The Ticking Sound From The Top Part Of The Engine Goes Away. The...
1 ANSWER
Asked by jmstodder

1999 Buick Regal Timing

1999 BUICK REGAL
Engine Mechanical Problem 1999 Buick Regal 6 Cyl Front Wheel Drive Automatic I Jusst Replace The Upper Intake On This Buick. It Had...
1 ANSWER
Asked by justice501

What Direction Does The Oil Hole Go On The Lifters...

1996 BUICK REGAL
I Have A Lifter Tap And I Rebuilt The Engine About 4000 Miles Age Does It Matter What Way The Oil Hole On The Lifters Faces? I Had The...
5 ANSWERS
Asked by Firemnted

Lifters Chattering Should I Be Able To Push The Center...

1996 BUICK REGAL
3800-2 Engine Rebuilt About 3500-3700 Miles Ago. I Did Not Replace The Cam Or Lifters. The Cam Checked Out Like New The Lifters In Question...
11 ANSWERS
Asked by Firemnted

Lifters Chartering

1996 BUICK REGAL
3500-4000 Miles On Rebuilt Engine, Oil Light Works But Don't Come On When Running. I Had The Engine Apart Foe 9 Months And Forgot What Way...
5 ANSWERS
Asked by Firemnted

Broken Push-rod

1995 BUICK REGAL
My Car Listed Above Is A Custom 3100 Vin Number M. My Car Was Running Rough And Ticking. One Day After Work Did A Compression Check Which...
4 ANSWERS
Asked by Custom blues

1993 Buick Regal Need Help On A Buick Regal

1993 BUICK REGAL
Engine Mechanical Problem 1993 Buick Regal Automatic Can You Please Tell Me Where The Cam Is Located On A '93 Buick Regal 3.1 L
1 ANSWER
Asked by sunshine2456

1992 Buick Regal Cam Sensor

1992 BUICK REGAL
Where Is My Cam Sensor Location
1 ANSWER
Asked by sobrien218@hotmail.com

1991 Buick Regal Cam Position Sensor

1991 BUICK REGAL
Computer Code Says Problem With Cam Position Sensor, I Have Changed Sensor, Checked Wiring, Replaced Ign Module, Maf Sensor, Still Same Code...
1 ANSWER
Asked by Dave R

Browse other repair topics

Browse by repair topic
SymptomsAir FilterBlockCamshaftComputerCoverCrankshaftCylinder HeadFlywheelGround StrapHarmonic BalancerIdle Air ControlIntake ManifoldKnock SensorMAP SensorMass Air Flow SensorMountOilOil CheckOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new Buick Regal question