Volvo Crankshaft

Browse Volvo Crankshaft questions and answers. Choose a question that matches your symptoms.

17 discussions

Crankshaft Sensor Code PO339

2007 VOLVO S40
I Keep Getting The Code Po339 Which Is Bad Crankshaft Sensor. So Far I Replaced The Old One With One Brand New And Two Used Ones And Still...
7 ANSWERS
Asked by struja98

A 2005 Volvo Xc90 V8, I Have 2 Problems With This...

2005 VOLVO XC90
A 2005 Volvo Xc90 V8, I Have 2 Problems With This Vehicle. Firstly I'm Pulling A Code With Respect To A Crank Position Sensor. Where And How...
1 ANSWER
Asked by Anonymous

I Have 2 Problems With This Vehicle. Firstly I'm...

2005 VOLVO XC90
I Have 2 Problems With This Vehicle. Firstly I'm Pulling A Code With Respect To A Crank Position Sensor. Where And How Do I Replace The...
1 ANSWER
1 IMAGE
Asked by Anonymous

Torquing The Crankshaft

2004 VOLVO S80
After Completing A Full Timing Belt, Pump, Idler, Tension-er, Belts And Serpentine Replacements, I Tighten My Crankshaft Pulley (center...
5 ANSWERS
Asked by Engineeringdad

P0335 Code, Will Not Start

2003 VOLVO S40
I Got P09335, P0336. And P0341 Codes. I Replaced The Camshaft And Crankshaft Sensors And Still Get The P0336 Code And It Wont Start. Thanks...
4 ANSWERS
14 IMAGES
Asked by martybeck

2001 Volvo S40 Location Of The Cam/Crankshaft Sensor

2001 VOLVO S40
Could Tell Where The Cam/crankshaft Sensor Is Located And Provide A Diagram For A 2001 Volvo S40. Thank You
1 ANSWER
Asked by Bullethead122

2001 Volvo S60 Timing Belt Cog On Crank Shaft

2001 VOLVO S60
Note The Volvo Is A 5 Cyl - Turbo Question: Does The Cog For The Timing Belt That Goes On The Crank Shaft Have To Be Tapped Down The...
7 ANSWERS
Asked by gbourbeau

Leaking Crankshaft Seal?

2000 VOLVO S40
There Is Oil Coming Out Inside The Timing Belt Cover. I Believe It To Be The Seal Behind The Crankshaft Gear. My Question Is Regarding The...
18 ANSWERS
9 IMAGES
Asked by Jeff Herman

I Need To Understand The Diffrent Between Camshaft...

2000 VOLVO S40
Problem With Car Cranking And Engin Running Rough Want To Change Camshaft Sensor But I Dont Know What It Looks Likeor Exactly Where It Goes...
1 ANSWER
Asked by rivieracoleman

Rear Seal Auto Gearbox 940

1995 VOLVO 940
If I Remove Prop Shaft Out Gearbox Can You Remove The End Seal Without Any Problems
3 ANSWERS
Asked by davdb

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadDipstickDrain PlugFlywheelHarmonic BalancerIdle Air ControlIntake ManifoldKnock SensorMAP SensorMass Air Flow SensorMountOilOil ChangeOil CoolerOil Fill CapOil FilterOil Level SensorOil PanOil Pressure SensorOil PumpOxygen SensorPistonReplace/RemoveSerpentine BeltStarterThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new Volvo question