UPPER CONTROL ARM Questions
Upper Control Arm
I Was Told There Is To Be Some Type Of Metal Plates Connected To The Upper Control Arm To Keep The Front End In Alignment And I Was Told...
Asked by Laurie Hoffer
Upper Control Arm Ball Joint Threads Failure?
I Put On New Suspension 2 Years Ago And The Ball Joint To The Driver Side Upper Control Arm Failed. The Threads Appear To Have Slowly...
Asked by Bravo97779
1995 Chevrolet Silverado Upper Control Arms
I Have Cranked My Torsion Bars Some And Bought Shock Extenders For The Front But Have Noticed That The Upper Control Arms Are Bottoming Out...
Asked by nick20179
Upper Control Arms Swap
Anyone Know If The Upper Control Arms Off A 1990 2wd Dakota Will Work On My 1994?
Asked by Adam Mack
Suspension Parts
My Wheels Shake A Bit When Driving. I Thought It Was Front End Stuff So I Bought Upper Control Arms, Both Sides, Lower Ball Joints, Inner...
Asked by Hoffy52
Upper Control Arm
My Daughter Recently Wrecked Her Car In Snow And Ice Storm. Damage To Left Front And Left Rear. Car Had Good Alignment After Repaired Body...
Asked by Pattie Johnson
1997 Ford F150 Upper Control Arm/ Upper Ball Joints
Can I Easily Get The Upper Ball Joint Loose With A Pickle Fork? Unbolting The Control Arm Isn't A Problem; Will Do It Myself And Save A Lot...
Asked by mw0248
Rear Upper Control Arm
Why Is My Caprice Bottoming Out In The Rear Passenger Side When I Accelerate.
Asked by impalanator_ss@gmail.com
Torque Specs Needed For Front Suspension Parts
I Am Replacing Upper Control Arms And Need To Know Torque Specs:
1 - Control Arm Mounting Bolts.
2 - Ball Joint Pinch Bolt.
Also Doing...
Asked by daisygirl8688
Upper Ball Joints And Upper Control Arms
I'm Having Trouble Getting The Upper Ball Joint, Moog Is The Manufacturer Of The Ball Joint, To Fit Into The Control Arm. The Ball Joint...
Asked by DMckee8612
