ENGINE IDLE HIGH

Recently Repaired The Starter Motor On My 2005 Ford Bantam Rocam 1.3i [replaced Brushes On Starter Motor]. A Day Or Two Later I Noticed Idle...

Fresh La 360 Build, With High Flow Heads, Mild Cam, Can't Get Idle Down Below 1,500 After Warm And Choke Open, Used Smoke Machine...

Changed The Idle Air Control Valve With A New One, Still On Start Up The Car Will Rev Up Out Of Nowhere To Like 2,500-3,000 And It Revs Up...

When I Crank It Up It Idles Very High. It Will Go Down A Little Bit When I First Crank It Up But When I'm Driving It And Go To Stop And...

Just Purchased The Truck Listed Above With A 305, Engine Idles High In Park And Neutral. Normal Idle When In Drive And Reverse. I Have Not...

When The Car Is Started The Idle Is Around 1800 To 2200 Rpm. After Warming Up Idle The Same In Park. I Did Have A P0420 Code When Checked...

Every Time I Crank My Car It Revs By Itself Without Me Pressing The Gas Pedal. I Tried Adjusting The Accelerator Cable But Still Revs Up...

So, I Have The Car Listed Above And I Recently Bought A New Carburetor For It. I Put It On And Started The Car, But I Would Start Idling...

Car When Started Idle High, Warms Up And Still Idle High. Replaced Maf Sensor, Idle Control Valve, And Cleaned Throttle Body. When Given...

Slow To Pull Off From A Stop Position, Revs High And Loud, Feels Like No Power. No Warning Lights On Dash.