REPLACE/REMOVE KNOCK SENSOR Questions

Cant Get It To Fire

1994 CHEVROLET S-10
Well I Have A 94 S10 Blazer 4x4 Vin W And I Just Did A Head Job On It And Replaced Almost Everything.like Injector, Egr,distributor, Knock...
1 ANSWER
Asked by davidc22

1998 Nissan Pathfinder Knock Sensor

1998 NISSAN PATHFINDER
Procedure For Replacing Sensor
1 ANSWER
Asked by adalam2u

Will The Car Run With A Bad Knock Sensor

1999 INFINITI I30
The Car Was Brought To Me With A Bad Computer, I Replaced It And The Injectors Will Not Pulse. (no Fire). The Only Codes The Scanner Shows...
1 ANSWER
1 IMAGE
Asked by A&M Performance

1991 Chevy Corsica Knock Sensor

1991 CHEVROLET CORSICA
Electrical Problem 1991 Chevy Corsica 6 Cyl Front Wheel Drive Automatic Code 43 Replaced Knock Sensor Removed Negative On Battery...
1 ANSWER
Asked by jerry adams23

Computer Or Electrical Issue

2002 JAGUAR XK8
Hi, This Car Came To Me For A Radiator Replacement And Another Complaint Was That It Goes Into "engine Failsafe Mode" While...
39 ANSWERS
18 IMAGES
Asked by cannon1349

Code P1326 Knock Sensor, Is There A Way To Test The...

2015 HYUNDAI SONATA
Customers Car Listed Above. Customer Stated, Check Engine Light Was Flashing And Took The Car To Autozone To Have Checked. Then Had Me...
5 ANSWERS
2 IMAGES
Asked by Totalmc

Car Gave Me Knock Sensor And Spark Plug Or Wire Code

1999 NISSAN ALTIMA
My Car Started To Sputter And Rpm Would Drop Around 600. When I Put It In Drive And Forth And Fifth Gears Car Would Lose Power .so I Started...
3 ANSWERS
1 IMAGE
Asked by Brandon Simmons

Had A Code For A Knock Sensor Replaced Both

2005 CHEVROLET SILVERADO
Had A Code For A Knock Sensor Replaced Both Of Them Cleared Code Out And It Came Back On . The Problems I Having Is Hesitation And Fuel...
2 ANSWERS
1 IMAGE
Asked by msj200283

Knock Sensor?

2002 CHEVROLET CAMARO
Changed The Knock Sensor 2 Times Now And The Pigtail As Well. It Runs Good For About 1 Hour, Then The Light Comes Back On And The Same Code...
1 ANSWER
Asked by Justin marsee

Duplicate

2000 NISSAN XTERRA
I Am Aware Of The Procedure For Relocating The Sensor, However Would I Be Able To Leave The Old Sensor Under The Manifold When Relocating?...
1 ANSWER
Asked by Jeff Moreland