REPLACE/REMOVE VALVE COVER CYLINDER HEAD Questions
1986 Toyota Corolla '86 Corolla, Cylinder Dropping...
This Is Car Model Ae82 With The Carburated Sohc 1.6l Model 4a Engine.
As Fuel Consumption Increased About 20% Since Last Summer, Last...
Asked by 51minx
1977 Pontiac Firebird PLUME OF DENSE SMOKE OUT OF RH...
1977 Ponticac Firebird With 400 Pontiac Engine.
What Can Cause A Big Plume Of Dense Smoke Out The Exhaust, On Right Side Only, At High Rpm...
Asked by whitestonepublishing
1998 Toyota Camry Very Noisey Under Valve Cover
I Had A Mechanic Check The Valve Train And He Said Both Cams And Related Parts Needed To Be Replaced. He Pulled The Valve Cover And Checked...
Asked by countywifi
Pink Anti Freeze
What Is The Deal With This Anit Freeze This Is The Second Time In 100,00 Miles In Replacing All The Gastkets. Head, Manafold, Valve Cover -...
Asked by fpanther
289 Engine Pushes Oil Out Of The Oil Filler/breather...
Hi All. My 289 Engine Pushes Oil Out Of The Oil Filler/breather Cap On The Valve Cover. I Removed The Valve Cover To Find Broken Valve...
Asked by tram567
2000 Ford Escort
Engine Performance Problem
2000 Ford Escort 4 Cyl Wheel Drive Type Unknown Automatic 100151 Miles
Car Starts Up Fine, Drives But When...
Asked by sheniq16
1987 BMW 528e 1987 Bmw 528e Tapping Noise On Valve...
I Had To Replace The Water Pump And Fan Clutch. In The Process You Have To Remove The Distributor, Rotor , And Timing Cover. The Rotor Was...
Asked by sholt46
1991 Toyota Camry Ignition Wires
While Attempting To Remove The Ignition Wires From The Spark Plugs, One Of The Wires Broke Inside The Metal Tube. I Removed The Valve Cover...
Asked by carlograss
2000 Dodge Caravan Oil Cap On Valve Cover
I Stripped The Oil Cap By Stupidly Turning It The Wrong Way. I Want To Remove It Safely Without Pieces Of It Falling Into The Engine Or...
Asked by et2petty
1996 Dodge Neon Valve Cover Vent Hose To The Throttle...
Has Anyone Replace The Hose That Runs From The Back Of The Valve Cover To The Throttle Body Air Hose. This Hose Two Different Diameters At...
Asked by deadredneon
