REPLACE/REMOVE COMPUTER Questions

I Changed The Engine, The Truck Has Been Sitting For A Couple Years. Wont Start My Book Says The Oil Or Batt Light Should Come On To Verify...

My 1983 Town Car Will Start Up Cold And Run Pretty Well Until It Warms Up. I Suspected The Coolant Temperature Sensor As Well As The Map...

My Haynes Manual Had Me Check The Ignition Module Connector.the Car Had Codes Of 16,36 ,42.i Checked The B Terminal With A Voltmeter...

Replaced The Crankshaft Position Sensor And Now It's Throwing A Code That None Of The Injectors Are Firing. It Cranks But Does Not Turn...

My Car Had Troubles Starting So I Had It Towed To The Nearest Garage. They Claim That It Needs About $2000 Worth Of Repairs Done....

5.2l Ram 1500 Van Will Not Start. Problems Began With A Routine Start, Hesitation, Rough Attempt To Idle And Immediately Quit. No Other...

I Am Having Problems With My 4.7 Motor Having Eratic Idle At Times The Error Code Is Saying It Is A Power Train Conrol Module Problem How...

I Live In Chicagoland. My Cvt Transmission Failed And I Went To A Transmission Shop To Repair. The Shop Installed A New Ford Transmission...

The C4 Connector Is Not Making Good Contact With The Pins. How Can I Remove The Pins? Is There A Tool And Tighten The Females?

I Want To Reset The Oil Change To 100% I Changed The Oil And It Is Now At 4%. I Have Tries Everything In The Book