CAMSHAFT PUSHROD Questions

Stuck Valve

1988 CHEVROLET 1500
Hi, I Have The Truck Listed Above Flare-side With A 5.7 Tbi V8. The Truck Sat For Three Years. I Did Spark Plugs, Cap, Rotor, Coil, Wires, A...
1 ANSWER
Asked by Michael Hooker

1999 Ford Expedition

1999 FORD EXPEDITION
How To Tell If You Have A Bent Push Rod On A 1999 Ford Expedition. Had A Chipped Spark Plug On #3 Cylinder Idles Rough,skipping, Lite...
1 ANSWER
Asked by leressawise

2001 Oldsmobile Bravada

2001 OLDSMOBILE BRAVADA
2001 Oldsmobile Bravada 6 Cyl I Have A 2001 Bravada And It Started Making A Tapping Noise,i Pulled Valve Cover And Discovered One...
1 ANSWER
Asked by jackie729

Can You Tell Me What The Push Rod To The Fuel Pump...

1994 ISUZU TRUCK
Can You Tell Me What The Push Rod To The Fuel Pump Looks Like? We Are Looking For It But Have No Clue What We Are Looking For. Its For A...
1 ANSWER
Asked by Anonymous

Just Bought A 1998 Pontiac Grand Am From A Friend....

1998 PONTIAC GRAND AM
Just Bought A 1998 Pontiac Grand Am From A Friend. Told Me That There Was A Problem With The Push Rod That Connects To The Head. But Said...
1 ANSWER
Asked by Anonymous

How Do You Remove The Brake Booster Push Rod From The...

1998 FORD CONTOUR
How Do You Remove The Brake Booster Push Rod From The Brake Pedal
1 ANSWER
Asked by Anonymous

Have Put On 4 Brand New Master Cylinders All Leak In...

1981 FORD FIVE HUNDRED
Have Put On 4 Brand New Master Cylinders All Leak In The Back Of The Master Cylinder . Could A Bent Push Rod In The Brake Booster Be The...
1 ANSWER
Asked by Anonymous

Ford Taurus

FORD TAURUS
Hi, I Have 1999 Ford Taurus Se With The Standard 12 Valve 155 Hp Engine. Once The Car Has Warmed Up I Am Getting High Pitch Squealing Sound...
1 ANSWER
Asked by robert1s

1997 Chevy Lumina

1997 CHEVROLET LUMINA
I Did A Head Gasket Push Rod Are Long And Short And I Didnt Do What I Should Have Doine By Pulling Them And Putting Them In Order In A Box...
1 ANSWER
Asked by JOSEPH FIXIT

1968 Chevy Camaro Oil Pressure

1968 CHEVROLET CAMARO
I Have A 68 Camaro With A 350 Chevy. Oil Pressure Has Dropped From 48 Psi To 42 Psi After Warm Up At 3000 Rpm. The Two Things I Have Done...
1 ANSWER
Asked by Eric Benninghoven