REPLACE/REMOVE CAMSHAFT SENSOR Questions

I Know Where My Cam Shaft Sensor Is But I Cant Seem To Get The Bolt Lose Any Suggestions? Are Do I Need To Bring My Car Straight To The...

Code For Camshaft Sensor. Changed Both Sensors And Did Not Fix Problem. Long Crank Times To Start , Check Engine And Vdc Lights Stay On....

Hi. I Replaced The Camshaft Position Sensor On My 2012 Vw Gti And It Ran Fine For A Week. Now The Check Engine Light Is On And Getting The...

I Went And Bought Me A Used Distributor At The Junk Yard To Replace My Old One Cause My Car.broke Down And When I Used The Obd2.reader To...

Have The Following Codes P0430, P0017, P0089, P0122, P0223 And P025a. Had Rough Start, Replaced Cam Shaft Sensor. Now It Smokes White And...

Threw Code For Camshaft Position Sensor. Was Running Rugged But Still Running. I Changed Cs Sensor Hooked Everything Back Up Now It’s...

Car Was Running Check Engine Threw The Code For Camshaft Sensor. I Replaced It An Now It Turns Over But Will Not Crank

I Changed Both Camshafts Bank 1 And Bank 2, Cleared Code Also. Now If I Drive Over 30 Minutes The Car Cuts Off I Have To Put It In Neutral...

It Started Out P010code Now It Has That Coed And The Speedometer Bounces And It Will Stall A Couple Weeks Before The Speedometer Stated...

Long Cranking I Checking Time Get 2389 Code We Will Change Cam Sensor Not Set 305 Crank Number . This Time Get In The Issue Is Not Start...