1984 Nissan 300ZX clutch

1984 NISSAN 300ZX
178,000 MILES • 6 CYL • 2WD • MANUAL
Avatar
JEWBOI85
  • MEMBER
  • 1 POST
i have an issue with my clutch... it was replaced less than 5 months ago. has been in and out of the shop for problem. never have i had a clutch problem but got it out of the shop and now my clutch is "slipping" i go to accerate and my engine just revs and i really dont go anywhere... what exactly is it and how do i take care of it
Nov 24, 2009 at 11:41 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
MHPAUTOS
  • CAR REPAIR CONTRIBUTOR
  • 31,937 POSTS
Hi there, the clutch and the operating system will have to be inspected for faults, make sure that the clutch fork and bearing are not riding the clutch with no pedal pressure, i would be thinking that the pressure plate may be faulty, but this wont be known until the clutch is removed for inspection.

mark (mhpautos)
Nov 24, 2009 at 11:56 PM
Advertisement