After washing the engine, engine cranks but does not start?

2001 NISSAN HARDBODY
200,000 MILES • 2.4L • 4 CYL • 2WD • MANUAL
Avatar
KIWA
  • MEMBER
  • 1 POST
After doing an engine wash, the motor only cranks but can't start. Checked the fuel system and all the 4 injectors firing at the same time. I replaced the plugs but nothing, when i removed the plugs, they came out wet and black, and checked the distributor could see a spark from the plug when cranking the motor. Right now, I am stuck and don't know what the problem could be.
Jul 24, 2023 at 2:18 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,178 POSTS
I would remove the distributor's electrical connector and dry it out and the engine should start. Also remove the distributor cap and use compressed air to dry it out as well. Check out the images (below). Please let us know how it goes.


Jul 24, 2023 at 3:10 PM
Advertisement