SPONSORED LINKS

2000 Mitsubishi Eclipse

Tiny
SPANKY21
  • MEMBER
  • 2000 MITSUBISHI ECLIPSE
  • 4 CYL
  • FWD
  • MANUAL
  • 123,000 MILES
We have a problem with injectors not pulseing on 3 and 4 the car trys to start but wont 1 and 2 are pulseing. Just wornding where we go from here?
Thursday, June 24th, 2010 AT 12:45 AM

3 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Hi spanky21,

Thank you for the donation.

Were the injectors tested and confirmed to be good?
Did you try swapping the injectors with cylinder 1 and 2?
Is there battery voltage at the Red wire when the ignition switch is turned ON?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, June 24th, 2010 AT 10:15 AM
Tiny
SPANKY21
  • MEMBER
  • 1 POST
Did not have the injectors tested but did swap 1 and 2 with 3 and 4 and still have no pulse on 3 and 4. There is power on the red wires the. Car quit running while driving down the road made a clicking noise then shut down. Aleardy checked all fuses timing and rocker arms, and compression. Changed cam position sensor. Car still does not start. Can you help.
Was this
answer
helpful?
Yes
No
Friday, June 25th, 2010 AT 12:34 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Do you have sparks at the plugs or is it just the injector that is not pulsing?
Was this
answer
helpful?
Yes
No
Sunday, June 27th, 2010 AT 1:12 PM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links