SPONSORED LINKS

Lower control arm

Tiny
ITISME1981
  • MEMBER
  • 1995 CHEVROLET SILVERADO
  • 5.7L
  • V8
  • RWD
  • AUTOMATIC
  • 200,000 MILES
I replaced the front driver side lower control arm.I torqued it down to the right torq. Then I had to loosen it to do something else. Now when I torq it all the way. It still moves up an down an doesn't stay in the position it was in when I torqued it. It is a brand new control arm. Do you think when I torqued it then took it off it did something to the bushings?I still got it back together.I am not driving it for this reason until I know it will be safe.
SPONSORED LINKS
Wednesday, April 6th, 2016 AT 9:57 AM

4 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If you didn't use new nuts and bolts that is your problem. And should have been torqued with suspension loaded (weight on wheels) 121 ft lbs.
Was this
answer
helpful?
Yes
No
Wednesday, April 6th, 2016 AT 12:13 PM
Tiny
ITISME1981
  • MEMBER
  • 15 POSTS
Ok.I did torque them to 121 ft lbs.I put the truck at normal ride height. The bolts are tight. Just the control arm still moves.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, April 6th, 2016 AT 12:18 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Ya but did you use new bolts and nuts? The locking part may be worn out.
Was this
answer
helpful?
Yes
No
Wednesday, April 6th, 2016 AT 1:24 PM
Tiny
ITISME1981
  • MEMBER
  • 15 POSTS
Ok. No I did not.I will get some new ones. Thank you.
Was this
answer
helpful?
Yes
No
Wednesday, April 6th, 2016 AT 1:29 PM

Please login or register to post a reply.

Related Lower Control Arm Replace/Remove Content

Lower Control Arm Bushing Replacement
VIDEO
Lower Control Arm Bushing Replacement
Instructional repair video
Control Arm Bushing Replacement - Lower
GUIDE
Control Arm Bushing Replacement - Lower
A lower control arm is designed to act as support between the car frame and the spindle which is where the tire is located. Every car is designed with control arms no matter...
VIEW MORE

Sponsored links