SPONSORED LINKS

Been bleeding brakes for nearly 20 years

Tiny
DCLINE30
  • MEMBER
  • 1998 JEEP WRANGLER
  • 6 CYL
  • 4WD
  • MANUAL
  • 120,000 MILES
Just did a drum to disc conversion on rear brakes. Been bleeding brakes for nearly 20 years. I can't get these brake to keep pressure no matter how much they are bled. There is no leak in the line anywhere. Jeep is off and I can build pressure then I turn it on to test and the pedal goes to the floor. Any thoughts?
SPONSORED LINKS
Saturday, May 10th, 2008 AT 1:20 PM

1 Reply

Tiny
BLACKOP555
  • MECHANIC
  • 10,371 POSTS
Suspect a bad vacuum booster maybe, could also be the master cylinder not being able to work with the back brakes? maybe issue with ABS if equipped. Here is a video and guide below to help you bleed the brake system correctly.

https://youtu.be/w7gUsj2us0U

and

https://www.2carpros.com/articles/how-to-bleed-or-flush-a-car-brake-system

and

https://youtu.be/WDxvEQrMkBg

Please run down these guides and report back.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, May 10th, 2008 AT 8:41 PM

Please login or register to post a reply.

Related Bleed - Flush Content

Bleed and Flush Your Brake System Correctly
VIDEO
Bleed and Flush Your Brake System Correctly
Instructional repair video
Brake System Flush
GUIDE
Brake System Flush
An automotive brake system flush is similar to a standard brake system bleed except for all of the brake fluid is flushed out of the brake system components such as the...
VIEW MORE

Sponsored links